Fordmods Logo

ea petrol probs 

 

Page 1 of 2 [ 17 posts ] Go to page 1, 2  Next

 
 Post subject: ea petrol probs
Posted: Sat Feb 10, 2007 7:40 pm 
Getting Side Ways
Offline

Age: 41

Posts: 638

Joined: 6th Nov 2004

Ride: 1994 Ford EF Fairmont Ghia Sedan

Location: Melbourne
VIC, Australia

Ok guys a curve ball for you,

The idle and drive on petrol is a little left field.
The car is duel fuel.
On gas it is perfect (admist a little less power for my liking :wink: )
On petrol, the idle is hunting really badly, If i hold the revs up to around 2000-2500 rpm, the engine starts to shake, when driving on petrol, the car is running rich, very very good pickup but blows ALOT of black smoke. If i have to stop. i.e. at a set of light and do not have my foot on the acc. aswell as the brake, the car will stall.

I have replaced the spark plugs and leads (8.0 mm eagle leads), replaced the O2 sensor, replaced the MAP sensor. From my looking, I cannot see any vac leads off anywhere. Replaced the air filter, replaced the fuel filter. I know that the fuel is getting to the injectors. Oh and BTW it is a centre point.


I am at a loss as to what it could be. I even tried to re-learn the ECU like in my prev car (EF) but to no avail. I need some help as sometimes i use petrol but the cops around here dont really like seeing black so i need some help as to what it could be please?

 

_________________

1994 ford fairmont ghia - Currently 302 with T5 - Work in progress :P

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 7:42 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 3687

Joined: 4th Mar 2005

Gallery: 23 images

Ride: XR6 Turbo

Location: Taree
NSW, Australia

prob rooted cloged up injector, do you use petrol much? check timing?

 

_________________

SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat.

Mods going on: Nizpro springs, bosch 040 pump + Walbro gss341, 600cc injectors, PWR transcooler, 20% Underdrives, 15psi Actuator, Kingspring SSL's, 15psi tune.....More coming

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 7:45 pm 
Getting Side Ways
Offline

Age: 41

Posts: 638

Joined: 6th Nov 2004

Ride: 1994 Ford EF Fairmont Ghia Sedan

Location: Melbourne
VIC, Australia

I try and use petrol as much as i can but with it playing up like this, i cant.

If it was the timing, then it would have the same prob on gas. The injectors were my next point of call, just wanting to hear other ideas first as can be expensive.

 

_________________

1994 ford fairmont ghia - Currently 302 with T5 - Work in progress :P

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 7:46 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 3687

Joined: 4th Mar 2005

Gallery: 23 images

Ride: XR6 Turbo

Location: Taree
NSW, Australia

Id go injectors next we have alot of cars that come in with the same prob and turns out to be a injector just get em tested

 

_________________

SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat.

Mods going on: Nizpro springs, bosch 040 pump + Walbro gss341, 600cc injectors, PWR transcooler, 20% Underdrives, 15psi Actuator, Kingspring SSL's, 15psi tune.....More coming

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 7:54 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

Yeah, I'd go the injectors to start with, fuel filter, and get the flow & pressure test for the pump.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 7:55 pm 
Getting Side Ways
Offline

Age: 41

Posts: 638

Joined: 6th Nov 2004

Ride: 1994 Ford EF Fairmont Ghia Sedan

Location: Melbourne
VIC, Australia

How much to get em tested? I am in VIC

 

_________________

1994 ford fairmont ghia - Currently 302 with T5 - Work in progress :P

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 8:03 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 3687

Joined: 4th Mar 2005

Gallery: 23 images

Ride: XR6 Turbo

Location: Taree
NSW, Australia

prices vary everywhere go get a quote from a few places

 

_________________

SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat.

Mods going on: Nizpro springs, bosch 040 pump + Walbro gss341, 600cc injectors, PWR transcooler, 20% Underdrives, 15psi Actuator, Kingspring SSL's, 15psi tune.....More coming

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 8:09 pm 
Getting Side Ways
Offline

Age: 41

Posts: 638

Joined: 6th Nov 2004

Ride: 1994 Ford EF Fairmont Ghia Sedan

Location: Melbourne
VIC, Australia

What sort of places would do the testing? and if they are rooted, how much to replace?

 

_________________

1994 ford fairmont ghia - Currently 302 with T5 - Work in progress :P

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 8:11 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 3687

Joined: 4th Mar 2005

Gallery: 23 images

Ride: XR6 Turbo

Location: Taree
NSW, Australia

Any EFI service center, Auto elecs? your local mechanic could prob suggest a few 2 ya.

 

_________________

SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat.

Mods going on: Nizpro springs, bosch 040 pump + Walbro gss341, 600cc injectors, PWR transcooler, 20% Underdrives, 15psi Actuator, Kingspring SSL's, 15psi tune.....More coming

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 8:12 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia

there is a posability your tps (throtle position switch)is stuffed ???

i dont think the tps is operational on a ea when its running on gas...
Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 8:13 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

The test should only take about 1/2 hour to perform for the flow & pressure test.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 8:19 pm 
Getting Side Ways
Offline

Age: 41

Posts: 638

Joined: 6th Nov 2004

Ride: 1994 Ford EF Fairmont Ghia Sedan

Location: Melbourne
VIC, Australia

Does anyone know of the rough price for an average joe blow, I.E. $40-$100?

 

_________________

1994 ford fairmont ghia - Currently 302 with T5 - Work in progress :P

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 8:22 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 3687

Joined: 4th Mar 2005

Gallery: 23 images

Ride: XR6 Turbo

Location: Taree
NSW, Australia

well cost me 400 to get em cleaned so tested id say half that.

 

_________________

SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat.

Mods going on: Nizpro springs, bosch 040 pump + Walbro gss341, 600cc injectors, PWR transcooler, 20% Underdrives, 15psi Actuator, Kingspring SSL's, 15psi tune.....More coming

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 8:24 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

You can get exchange ones from Repco. The are called Aznew. They are about the same price as getting them cleaned & tested.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
Posted: Sat Feb 10, 2007 8:25 pm 
Getting Side Ways
Offline

Age: 41

Posts: 638

Joined: 6th Nov 2004

Ride: 1994 Ford EF Fairmont Ghia Sedan

Location: Melbourne
VIC, Australia

mmmmmmmm If they are going to be that expensive then they can just stay that way thankyou

 

_________________

1994 ford fairmont ghia - Currently 302 with T5 - Work in progress :P

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 17 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 89 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 10:35 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names