|
| Kurt2fast |
|
||
|
Hi guys I'm looking at buying a xm/xp/xw/xy wagon in the next year and also want run a boosted 6. I want to know what's the best and cheapest way doing this. It will not be a drag racer just a cool everyday car. I was thinking of a stock AU engine with bolt on stuff from ebay running low boost. But I don't know which is the best engine to use that's also the cheapest
|
||
| Top | |
||
| Shortshift |
|
|||
|
IMO, get a BA or BF XR6 Turbo that's been written off and use the engine, looms & ECU. At least you're in the ball park for emissions and an Engineer's Certificate.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| Kurt2fast |
|
||
|
Thanks mate I thought of that way but was not sure.
I have looked a lot into it and you can buy a brand new Gtr35 Ebay turbo for around $300 and considering I'm not planing on using high boost I would think it would last a long time. Reading other posts I believe the LPG au engine is the strongest but just not sure but most of these engines are pretty cheap. ???? |
||
| Top | |
||
| Mad2 |
|
|||
|
Kurt2fast wrote: Reading other posts I believe the LPG au engine is the strongest but just not sure but most of these engines are pretty cheap. ???? what about a BA/BF gas engine? |
|||
| Top | |
|||
| Kurt2fast |
|
||
|
Also don't know which engine would be the best and easiest fit into a xm/xp/Xy/xw wagons I love all these shapes and which one I go with might be the one that is the easiest to convert as I'm going to do most of the work myself
|
||
| Top | |
||
| SWC |
|
||
|
Shortshift wrote: IMO, get a BA or BF XR6 Turbo that's been written off and use the engine, looms & ECU. At least you're in the ball park for emissions and an Engineer's Certificate. To fit the Barra into an XK/XP you will need to knot the strut towers. Barra just fits into the XR-XY. http://www.rrs-online.com.au/au/typhoon ... sions.html. Engine bay pic or an XP with a Barra, notice the notched towers. Attachment: XP with Barra.jpg [ 26.42 KiB | Viewed 525 times ] |
||
| Top | |
||
| SWC |
|
||
|
Kurt2fast wrote: Thanks mate I thought of that way but was not sure. I have looked a lot into it and you can buy a brand new Gtr35 Ebay turbo for around $300 and considering I'm not planing on using high boost I would think it would last a long time. Reading other posts I believe the LPG au engine is the strongest but just not sure but most of these engines are pretty cheap. ???? AU LPG Bottom end is exacltly the same as a std AU Bottom End. Barra dedicated gas engines had stronger rods and higher comp. High comp not the best for boost applications (Ok on low boost) |
||
| Top | |
||
| SWC |
|
||
|
Kurt2fast wrote: Also don't know which engine would be the best and easiest fit into a xm/xp/Xy/xw wagons I love all these shapes and which one I go with might be the one that is the easiest to convert as I'm going to do most of the work myself Look at using a AU Block and rebuilding it. If you want it stronger use BA F6 Rods and pistons. Port the AU Head and fit a suitable cam. |
||
| Top | |
||
| Mad2 |
|
|||
|
Kurt2fast wrote: Also don't know which engine would be the best and easiest fit into a xm/xp/Xy/xw wagons I love all these shapes and which one I go with might be the one that is the easiest to convert as I'm going to do most of the work myself then you will need to get friendly with a few people who own those cars .... plus someone who owns either style of engine & measure .... compare & ask questions 
|
|||
| Top | |
|||
| inblack |
|
||
|
Want to use a BA dedicated gas engine with a Turbo in next project, Possible? Where to go and what do buy to achieve this?? Cost?
Have BA petrol, Dedicated gas & AU dedicated gas engines on garage floor choices but info required. Thanks. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 60 guests |
