Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

eb t5 gearbox on au motor 

 

Page 1 of 1 [ 11 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
snelly91
 Post subject: eb t5 gearbox on au motor
Posted: Fri Jul 15, 2011 6:03 pm 
Fordmods Newbie
Offline

Age: 33

Posts: 8

Joined: 24th Mar 2010

Ride: eb fairmont

Location: perth
WA, Australia
hi guys ive got a eb fairmont with a t5 gearbox in it and i want to put a au xr6 motor in just wanna know if it will bolt up to it considering i have done the other mods to the engine.
Top
 Profile  
 
 
bry40l
 Post subject: Re: eb t5 gearbox on au motor
Posted: Fri Jul 15, 2011 6:14 pm 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
Yep, will go straight on

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: eb t5 gearbox on au motor
Posted: Fri Jul 15, 2011 6:19 pm 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
it will fit, but if you dont use a au bellhousing the 4 lower bolts on the au engine wont line up..
i ran mine without the 4 lower bolts for a year without any problems,
Top
 Profile  
 
 
snelly91
 Post subject: Re: eb t5 gearbox on au motor
Posted: Fri Jul 15, 2011 6:39 pm 
Fordmods Newbie
Offline

Age: 33

Posts: 8

Joined: 24th Mar 2010

Ride: eb fairmont

Location: perth
WA, Australia
cheers for that
Top
 Profile  
 
 
Justin-A
 Post subject: Re: eb t5 gearbox on au motor
Posted: Fri Jul 15, 2011 11:31 pm 
Parts Gopher
Offline

Age: 32

Posts: 76

Joined: 2nd Jul 2010

Ride: 96 EF 5 Spd

Location: lara
VIC, Australia
if you will be getting a roady on it drill and tap the 4 holes so you can put a bolt through is alot easier with box and engine out of car than in i learnt the hard way haha
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: eb t5 gearbox on au motor
Posted: Sat Jul 16, 2011 9:28 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
or just go and buy an au bellhousing...
Top
 Profile  
 
 
bry40l
 Post subject: Re: eb t5 gearbox on au motor
Posted: Sat Jul 16, 2011 9:36 am 
Getting Side Ways
Offline
User avatar

Age: 32

Posts: 4583

Joined: 30th Aug 2010

Ride: BF XR6,

Location: NEWCASTLE
NSW, Australia
How hard would it be to find an au manual bellhousing

 

_________________

BF XR6
xr8 snorkel,typhoon lower snorkel,territory intake pipe,20% underdrive kit,pacemaker extractors,high flow cat,xforce exhaust,t56 conversion hd turbo clutch/ flywheel,m86 3.45 lsd,custom tune187.1rwkw as an auto
Top
 Profile  
 
 
TROYMAN
 Post subject: Re: eb t5 gearbox on au motor
Posted: Sat Jul 16, 2011 9:39 am 
Moderator
Offline

Posts: 14489

Joined: 7th Nov 2004

Ride: AU XR8

Location: a shit suburb in sydney
NSW, Australia
not quite as easy as an e series, but they are around... as time goes on au parts are getting easier to find and are getting cheaper..
Top
 Profile  
 
 
ILLaViTaR
 Post subject: Re: eb t5 gearbox on au motor
Posted: Sat Jul 16, 2011 10:08 pm 
Getting Side Ways
Offline

Posts: 597

Joined: 4th May 2007

Ride: 1992 EBII Fairmont

Location: Aga
VIC, Australia
It's one of those parts that clowns won't sell for less than $300 like common V8 parts that are wrongly perceived as rare. Just use the Eb one and do as others here suggested.
Top
 Profile  
 
 
snelly91
 Post subject: Re: eb t5 gearbox on au motor
Posted: Sun Jul 17, 2011 9:42 pm 
Fordmods Newbie
Offline

Age: 33

Posts: 8

Joined: 24th Mar 2010

Ride: eb fairmont

Location: perth
WA, Australia
ill have a look around for a au one as the car would be doing prob couple track days once its done so it has to with stand a bit of stress
Top
 Profile  
 
 
wagonstyle
 Post subject: Re: eb t5 gearbox on au motor
Posted: Mon Aug 22, 2011 6:09 pm 
Stock as a Rock
Offline
User avatar

Age: 37

Posts: 146

Joined: 31st Aug 2010

Ride: 04 ba wagon

Location: Newcastle
NSW, Australia
Justin-A wrote:
if you will be getting a roady on it drill and tap the 4 holes so you can put a bolt through is alot easier with box and engine out of car than in i learnt the hard way haha


What bell housing did you use??

 

_________________

..wagonstyle..
04 ba wagon, manual conversion, pacemaker extractors, custom exhaust, m86lsd, full electric window conversion, dual zone icc, gt front end with body kit getting made

Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 11 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: Facebook [Bot], Google Adsense [Bot] and 87 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Nov 25, 2024 6:29 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names