Fordmods Logo

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

eb xr6 won't go over 2.5 grandfrank 

 

Page 1 of 1 [ 10 posts ] 

Post New Topic Post Reply  Previous topic Next topic
 
tyranes eb xr6
 Post subject: eb xr6 won't go over 2.5 grandfrank
Posted: Tue Dec 27, 2011 6:00 pm 
Fordmods Newbie
Offline

Age: 36

Posts: 9

Joined: 7th Aug 2011

Ride: EB XR6 5speed 1992

Location: perth
WA, Australia
I have changed the fuel pump, new dizzy, new fuel filter, changed the map sensor vacum hose cause it had a split in it but still no go! Lots off black smoke coming out the back! Mate seems 2 think map sensor is gone and its running rich, fludding it wen u rev her up!
Top
 Profile  
 
 
BenJ
 Post subject: Re: eb xr6 won't go over 2.5 grandfrank
Posted: Wed Dec 28, 2011 5:36 pm 
Getting Side Ways
Offline

Posts: 5503

Joined: 20th May 2005

Gallery: 11 images

Ride: EB1 Fairmont Ghia T5 Wagon

Location: Seven Hills, Sydney
NSW, Australia
I had a similar issue on me EB and it proved to be the map sensor. We were doing an engine change and the engine bumped against it going in.

The car started etc, but wouldn't rev over 3k or so and after a bit of stuffing around swapped out the map sensor for a known good one.

Problem fixed.

It is a simple thing to swap in so I say give it a try.

Cheers
BenJ

 

_________________

BenJ's EB T5 DOHC Ghia Wagon - Current Ride
BenJ's EB GL Sedan - Previous Ride
My respect and thanks go to - snap0964, Paulmac, SWC and MRE-50L
Top
 Profile  
 
 
tyranes eb xr6
 Post subject: Re: eb xr6 won't go over 2.5 grandfrank
Posted: Fri Dec 30, 2011 10:13 am 
Fordmods Newbie
Offline

Age: 36

Posts: 9

Joined: 7th Aug 2011

Ride: EB XR6 5speed 1992

Location: perth
WA, Australia
cheers ben really appreciate that! i change the map sensor and the 02 sensor but no go!! wen it gets 2 2.5 rpm the motor starts shaking like its going 2 jump out the engine bay :( any other idears would be appreciated!!!!!!!
Top
 Profile  
 
 
TimmyA
 Post subject: Re: eb xr6 won't go over 2.5 grandfrank
Posted: Fri Dec 30, 2011 10:47 am 
Technical Contributor
Offline
User avatar

Age: 35

Posts: 3714

Joined: 27th Sep 2006

Gallery: 20 images

Ride: ED Falcon

Power: 133 rwkw

Location: Leeton
NSW, Australia
Is it timed right?

Have you done anything to it that has possibly caused this to happen? Helps us give you some ideas on what could have gone wrong...

Cheers
Tim

 

_________________

93 Red ED 5spd Manual Build Thread

Performance: Complete AUII VCT Wiring & Power Train, Pacey Headers, 2.5" Exhaust, Exedy Clutch, DBA Rotors
Visuals: FG XR Wheel, XR Front, 17's, BA 5 Spd Shifter, BA Ghia Window Switches, NL Cluster
Tunes: 8" Pioneer Sub, JBL Speakers, Clarion Double DIN Headunit
Top
 Profile  
 
 
tyranes eb xr6
 Post subject: Re: eb xr6 won't go over 2.5 grandfrank
Posted: Fri Dec 30, 2011 1:12 pm 
Fordmods Newbie
Offline

Age: 36

Posts: 9

Joined: 7th Aug 2011

Ride: EB XR6 5speed 1992

Location: perth
WA, Australia
cheers tim! it just got worse and worse 2 the point i can get over 20/30 km over bout 4 weeks! theres a bit of oil coming out the front of the head but been told that wouldnt cause the problem... :( do u recon the injectors could be nacked????
Top
 Profile  
 
 
ebxr82nv
 Post subject: Re: eb xr6 won't go over 2.5 grandfrank
Posted: Fri Dec 30, 2011 1:17 pm 
Getting Side Ways
Offline

Age: 41

Posts: 1353

Joined: 15th Mar 2007

Gallery: 7 images

Ride: AU XR6

Power: 171 rwkw

Location: thornton
NSW, Australia
Have a look at the exhaust, it won't rev if it can't get the gas out

 

_________________

9/98 AU1 XR6hp-about to retire from the road and be reborn on the race track.
86 ZL mint grandpa spec with premo sound and 150000km
07 TTG 60000km stock as, mods to come.
97 el futura about to be MOCKed
Top
 Profile  
 
 
SWC
 Post subject: Re: eb xr6 won't go over 2.5 grandfrank
Posted: Fri Dec 30, 2011 1:28 pm 
Technical Contributor
Offline

Age: 67

Posts: 6815

Joined: 22nd Jun 2005

Gallery: 8 images

Ride: EF Fairmont

Location: Campbelltown
NSW, Australia
Could be collapsed Cat. Pull the O2 sensor and see if it will rev then. If it has extractors, pull the cat off and see how it goes, if stock manifold just pull the O2 sensor.
Top
 Profile  
 
 
tyranes eb xr6
 Post subject: Re: eb xr6 won't go over 2.5 grandfrank
Posted: Fri Dec 30, 2011 1:28 pm 
Fordmods Newbie
Offline

Age: 36

Posts: 9

Joined: 7th Aug 2011

Ride: EB XR6 5speed 1992

Location: perth
WA, Australia
cheers bud will have a look at that soon!!!
Top
 Profile  
 
 
Pakrat
 Post subject: Re: eb xr6 won't go over 2.5 grandfrank
Posted: Sun Jan 01, 2012 7:14 pm 
Getting Side Ways
Offline

Age: 33

Posts: 789

Joined: 9th Dec 2011

Ride: S1 eb 5speed

Location: Coffs Harbour
NSW, Australia
Sounds like collapsed cat.
Could also possible be the 02 sensor. Double check you're timing.
Top
 Profile  
 
 
tyranes eb xr6
 Post subject: Re: eb xr6 won't go over 2.5 grandfrank
Posted: Wed Jan 04, 2012 3:11 pm 
Fordmods Newbie
Offline

Age: 36

Posts: 9

Joined: 7th Aug 2011

Ride: EB XR6 5speed 1992

Location: perth
WA, Australia
thanks every1 that give me advice on my car turns out its the cat!!!! melted and blocked up :( thanks again :)
Top
 Profile  
 
Display posts from previous:
Sort by  
Post New Topic Reply
 Page 1 of 1  [ 10 posts ] 
Jump to:  

Home » Forums » Fordmods Tech » 6 Cylinder Workshop

Who is online

Users browsing this forum: No registered users and 92 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Nov 25, 2024 8:32 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names