|
| EB91XR6 |
|
|||
|
hey guys
have a ED falcon atm and i have washed the engin bay with water and degreaser, now it wont start i have put fuel in it and cheeked for spark and the fuel pump is working, the car has smart lock and i dont know if that would affect anything with water, has any one had this issue and fixed it as it has me stumped
_________________ 1976 XC falcon
|
|||
| Top | |
|||
| EALCON 3.9 |
|
||
|
you said u have checked to see if u have spark, but is there spark or no spark? if that makes any sense
|
||
| Top | |
||
| wicksy |
|
|||
|
water on the leads or distributor, let it dry and see waqt happens
_________________ Now i have a EF XR8 5spd.........mmmmmm 5L |
|||
| Top | |
|||
| braidy |
|
|||
|
Coil.
_________________ RIP Chelsea |
|||
| Top | |
|||
| mendyxr6 |
|
|||
|
map sensor connector may have water in it. had this prob my self and it didnt start after degreasing engine bay
_________________ kangaroos and radiators are a bad mixture |
|||
| Top | |
|||
| neddy |
|
|||
|
Check for water in the dizzy, usually it will start if you wash it but it might run rough. But sounds like you took it for a swim lol.
_________________ In hope we believe... but in God we trust... |
|||
| Top | |
|||
| Bsjenko |
|
|||
|
yeah sounds like you went a bit bizerek witht eh water etc.... Spray some water dispercent around plugs, leads, etc and let it sit for a bit then give it a crank over.
Unless you had the pressure gun onto it, and you have opened up something and water has gotten in. But more likely just water condensation.
_________________ The Lane Lives.... Finally!!!! |
|||
| Top | |
|||
| tritty-02 |
|
||
|
Try your air sensor, if its not plugged in, or the plugs corroded it will not work.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 144 guests |
