|
| EDXR6-Poly |
|
|||
|
just latly my car wont lock with the key (remote) new remote and programmed it, pressed the boot relese 3 times within 5 secs and locks go up and then down but when i push the remote button to make it learn nothing happens
So i pulled out the RED bcm thing today and opened it up there is some corrosion nead where the pins are soldered to the board so i brushed it off with an old tooth brush and checked the relay near the park brake handle and reinstalled And now it wont go the learn mode (locks dont go up and down) but car starts and runs fine and central locking still works with the key in the door Can i just replace the BCM and it will be right to program the remote again and drive away ? or more in depth problem ahead of me ? can i use a different BCM?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
If you have opened it up before, why not just resolder the connectors & see how you go?
Other wise, replace it with another red BCM. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| EDXR6-Poly |
|
|||
|
so has to be a ed one or can it be a eb ed el ef one? any colour?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| BenJ |
|
||
|
Yep, you need a red one, and only from and EB11 to ED. I have seen a yellow one in an ED, and am not sure it it will work in an EB.
Then you need to do the whole relearn process for the smartlock side of it, and then the relearn process for the remote central locking component. Cheers BenJ
_________________ {DESCRIPTION} - Current Ride |
||
| Top | |
||
| ford-racer46 |
|
|||
|
Hay guys are they hard to replace? what do they do? mine just caved
_________________ Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake! |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
{USERNAME} wrote: Hay guys are they hard to replace? what do they do? mine just caved They just unscrew & unclip from the wiring loom, slide it out from under the dash & fit the new one. Hardest part (not that hard) is the relearn process BenJ mentioned. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| ford-racer46 |
|
|||
|
Thanks man, i cant wait to spend hundreds fixing this problem
_________________ Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake! |
|||
| Top | |
|||
| ford-racer46 |
|
|||
|
Scratch that!! i just got quoted $160,
 still alot but better than Profix.
_________________ Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake! |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
{USERNAME} wrote: Scratch that!! i just got quoted $160, still alot but better than Profix.That's way too much, the module should be fairly cheap in the wreckers... Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| ford-racer46 |
|
|||
|
Yeah??
 , i was told its better to repair because they all eventually fail.
_________________ Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake! |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
{USERNAME} wrote: Yeah?? , i was told its better to repair because they all eventually fail.Everything eventually fails. If there are plenty of bcm's available in wreckers that are a lot cheaper than repair, it's worth considering just replacing it. You couldn't repair it yourself could you? IE, handy with a soldering iron? Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| ford-racer46 |
|
|||
|
Nah mate im an eletric tape junkie, i can do some basic things like cams, exhaust, amps stuff like that...but pro stuff like soldering(stereos) ,painting( rocker covers...CAR) im just unco! and as for this BCM, ive been told were it is and what it looks like, but im still sure im gonna dooch it.
But ill try anyways 
_________________ Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake! |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
There is only one or two screws & a wiring plug that hold it into the car, shouldn't be hard to remove it & slap another one in there. Then do the relearn.
Otherwise it might be worth paying for the repair you were quoted, what sort of warranty period did that have? Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| ford-racer46 |
|
|||
|
I suppose i should have asked....maybe i could take it out and get them to re-solder save some labour.
_________________ Now, I've got a message for all the other drivers out there. If you smell a delicious, crispy smell after the race, it's not your tailpipe. It's just a little of Shake...and Bake! |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
{USERNAME} wrote: I suppose i should have asked....maybe i could take it out and get them to re-solder save some labour. It's worth asking about, probably save you 1/2 hour labour charge on the job. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|{DESCRIPTION}|{DESCRIPTION}|{DESCRIPTION}| |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 33 guests |
