|
| TimmyA |
|
|||
|
He said bumping the dash didn't help though...
Usually when this is the problem bumping the dash caused the relay to make and gets you going... Doubt this is the issue after what you described somehow... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| mockxr6 |
|
||
|
TimmyA wrote: He said bumping the dash didn't help though... Usually when this is the problem bumping the dash caused the relay to make and gets you going... Doubt this is the issue after what you described somehow... Cheers, Tim in this case it actually worked. the smartlock was getting signal in but not out. after i stuffed around for nearly an hour i got the wires out to where i could work on them, i bridged them and the car started first go. tried a couple more times and perfect. so i soldered them up and heatshrinked them taped them then spent another hour putting it all back in place (i am not very flexible to get under dashes at 120 kg) so yeah thanks to everyone on here for the help you all offered. the car is fixed with 2 days to spare.. so 2 days of trials before the long trek.. Thanks to you all |
||
| Top | |
||
| TimmyA |
|
|||
|
News to me to then...
Glad you all set now and no more hassles... Just remember now that you've done that you've disabled smartlock from imobilising your car... Not that its a great system but its a system none the less so just be aware of that... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| TROYMAN |
|
||
|
all he has done is bypassed the starter motor curcuit, the smartlock will still imobilise the ecu if someone tries to steel it...
although its easy to get around that to... |
||
| Top | |
||
| TimmyA |
|
|||
|
ah thats right... there is the EEC enable wire too...
 I knew that...
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| EF_96_XR |
|
|||
|
TimmyA wrote: He said bumping the dash didn't help though... Usually when this is the problem bumping the dash caused the relay to make and gets you going... Doubt this is the issue after what you described somehow... Cheers, Tim Yea i was thinking the when i read the thread, but then remeberd that i have had one falcon at work that just straight up refused to start even with a wack to the dash.. so thought it was worth a go!
_________________ 96 EF XR6 Factory 5 sp, currently in the middle of building a new motor |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 113 guests |
