|
| TROYMAN |
|
||||
|
here is a diagram of how it should be...
post up a pic of your car, and how the headlight wiring is??
|
||||
| Top | |
||||
| mockxr6 |
|
||
|
will throw up a pic in a sec.. thanks for the diagram but you wouldnt know what colours are what?
|
||
| Top | |
||
| mockxr6 |
|
||||
|
mockxr6 wrote: will throw up a pic in a sec.. thanks for the diagram but you wouldnt know what colours are what?
|
||||
| Top | |
||||
| ausedwagon |
|
|||
|
TROYMAN wrote: here is a diagram of how it should be... post up a pic of your car, and how the headlight wiring is?? in the diagram can u put in the plug position? im unsure if the 5th pin on the new relay needs to bypas the plug or what... i just havent seen something that clicks yet...
_________________ 94 White ED Wagon |
|||
| Top | |
|||
| mockxr6 |
|
||
|
the white plug you can see is plugged into the wiring loom. it then has 2 black wires (earth?), a pink/yellow wire (low beam), a pink/white, and pink/black and pink/red(indicator).
now the pink/white and pink/black both come on with the high beam. i am unsure as to why there are 2 high beam wires. i have tried to add them to the feed for low beam to see if they might feed the low beam while the high is on but all that acheived was having all 4 lights on on either hi or low |
||
| Top | |
||
| TROYMAN |
|
||
|
looks like someone has dodgy wired your headlights..
i did this conversion a few years back on an ea that didnt have the extra wires.. post618949.html#p618949 |
||
| Top | |
||
| mockxr6 |
|
||
|
problem is solved. it was dodgy wiring. i disconnected the earth wire from the low eam and substitued with the extra high beam wire i had.. problem solved.. but i now have an extra earth.. i am sure i can find something to use it on
|
||
| Top | |
||
| ausedwagon |
|
|||
|
im still confuesed.....
so i run the extra wire from the 5th pin on the relay to the hi beem power wire?
_________________ 94 White ED Wagon |
|||
| Top | |
|||
| TROYMAN |
|
||
|
ausedwagon wrote: im still confuesed..... so i run the extra wire from the 5th pin on the relay to the hi beem power wire? long story short.... yes... |
||
| Top | |
||
| mockxr6 |
|
||
|
TROYMAN wrote: ausedwagon wrote: im still confuesed..... so i run the extra wire from the 5th pin on the relay to the hi beem power wire? long story short.... yes... my car had the 2 wires for the high beams there already. basically you doo this.. no earth to low beam just 1 high beam wire and one low beam wire. high beam has a hig beam wire and an earth. it looks like you only need to earth the whole shebang by the one earth wire to the high beam. i ran the leftover earth i had to the body just to be safe.. |
||
| Top | |
||
| mockxr6 |
|
||
|
ok mine still not going properly.. had a mini meltdown last night.. can someone with the twin lights please tell me what colours the wires are. starting at the black wiring plug with orang/green, blacks, red/black etc etc going to each individual light.. that way i can wire mine up to match.. my wires are everywhere from the black plug and i am gunna pull out everything between the wiring loom and the lights and make my own little looms for the lights. so any help would be great.. i will take pics along the way and post them up for others to follow..
|
||
| Top | |
||
| TROYMAN |
|
|||||
|
mockxr6 wrote: TROYMAN wrote: ausedwagon wrote: im still confuesed..... so i run the extra wire from the 5th pin on the relay to the hi beem power wire? long story short.... yes... my car had the 2 wires for the high beams there already. basically you doo this.. no earth to low beam just 1 high beam wire and one low beam wire. high beam has a hig beam wire and an earth. it looks like you only need to earth the whole shebang by the one earth wire to the high beam. i ran the leftover earth i had to the body just to be safe.. thats so wrong, by the sound of it, someone has f**k your wiring up so bad... mockxr6 wrote: ok mine still not going properly.. had a mini meltdown last night.. can someone with the twin lights please tell me what colours the wires are. starting at the black wiring plug with orang/green, blacks, red/black etc etc going to each individual light.. that way i can wire mine up to match.. my wires are everywhere from the black plug and i am gunna pull out everything between the wiring loom and the lights and make my own little looms for the lights. so any help would be great.. i will take pics along the way and post them up for others to follow.. ok the thick black is earth for low and high beam, the thin black is earth for parker globe. the green/orange is high beam power, red/black is low beam power and brown is parker globe power.. thats it... and this is the plug for the diod link under the header tank.. Attachment: DSC02083.JPG [ 186.55 KiB | Viewed 150 times ]
|
|||||
| Top | |
|||||
| mockxr6 |
|
||
|
thanks troyman.. thats helps heaps.. now i can wire it properly then modify it to make all 4 lights work.. i owe ya drink...
|
||
| Top | |
||
| mockxr6 |
|
||
|
ok well i rewired the headlights following the colours you gave me..
the lights all come on on high beam and only the lows on low beam.. this is great it works as it should. i got rid of the white plugs and wired it up using spade plugs and new wires with my own colour coding (which i have written down) now i ask you this. under the header tank there is a diode already there other than the one i have to put in.. what does this doiode run cause i used it to test my lighting system and if i can get away with it for the weekend i will leave it n there. i just cant find what it runs and dont want to run the risk of not having something like the ECU not working properly or someting silly like that. |
||
| Top | |
||
| TROYMAN |
|
||
|
im not sure what the second one is for..
what you can do is use 2 spade connectors with a short piece of wire and bridge the headlight one untill you get another one... |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 100 guests |
