|
| twase |
|
|||
|
twr7cx wrote: I was enquiring about this before Waggin, and was told that all LWB (wagons and utes too) come with the Alloy tailshafts which are the same as the XR6/Tcikford ones. Not correct. My ex cop EF v8 wagon had a steel tailshaft. It was a 1994 one so perhaps this comment refers to series 2? Cheers TW
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| fordman351 |
|
|||
|
2qik wrote: Anyone have any Perth contacts for tailshafts?
Veem Engineering, 22 Baile Road, Canning Vale Ph: 94559372 
|
|||
| Top | |
|||
| 4.9 EF Futura |
|
|||
|
For the sydney folk, i'm sure XR8Chic had a custom tailshaft made up after that incident on the dyno. The member in question is always willing to recommend good workshops...
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| One Drone |
|
|||
|
$300-400 given to Chiptorque or UniChip I've heard will get you a little box that will get rid of the speed limiter.
However make sure everything else is working first before the so-called driveshaft removes your prized package.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| Hyena |
|
|||
|
Terrorist Ghia was telling me about a jaycar kit he bought which supposedly removes the speed limiter. He offered it to me but I have another solution planned so maybe shoot him a PM
_________________
|
|||
| Top | |
|||
| Spider_GT |
|
|||
|
|
|||
| Top | |
|||
| 2qik |
|
|||
|
cheers fordman351 - any idea of rough price? no biggy, i can call em if not
_________________ Supercar front & wing,Ghia bonnet & lights,XR skirts,17s,ABS,slotted rotors,race pads,low 2.5in,lovells springs,KYB shocks,fr camber kit,K&N,mandrel-bent straight-thru zorst,3.23LSD,neons,blue LED dash conversion,XR vents,v8 radiator,oil cooler,big stereo. Needs boost! |
|||
| Top | |
|||
| 2qik |
|
|||
|
cheers fordman351 - any idea of rough price? no biggy, i can call em if not
_________________ Supercar front & wing,Ghia bonnet & lights,XR skirts,17s,ABS,slotted rotors,race pads,low 2.5in,lovells springs,KYB shocks,fr camber kit,K&N,mandrel-bent straight-thru zorst,3.23LSD,neons,blue LED dash conversion,XR vents,v8 radiator,oil cooler,big stereo. Needs boost! |
|||
| Top | |
|||
| exholden |
|
||
|
hey, how fast will an EF/EL run without the speed limiter?
Not that im going to remove it, but im just wonderin |
||
| Top | |
||
| 4.9 EF Futura |
|
|||
|
exholden wrote: hey, how fast will an EF/EL run without the speed limiter?
Not that im going to remove it, but im just wonderin 180km/hr... give or take a few ks EDIT: my bad, without the limiter - she'd have to be geared for 240 at least?
_________________ I promise..... I will never die. |
|||
| Top | |
|||
| 2qik |
|
|||
|
I agree... mine drops into 4th at like 170 something so theres plenty of revs left past 180
_________________ Supercar front & wing,Ghia bonnet & lights,XR skirts,17s,ABS,slotted rotors,race pads,low 2.5in,lovells springs,KYB shocks,fr camber kit,K&N,mandrel-bent straight-thru zorst,3.23LSD,neons,blue LED dash conversion,XR vents,v8 radiator,oil cooler,big stereo. Needs boost! |
|||
| Top | |
|||
| BigCav |
|
||
|
weve had an xr6 manual to 250 with a bit more to go, stock and still pulling and xr6 arnt that much more powerfull than stockers
|
||
| Top | |
||
| kermey |
|
|||
|
fordman351 wrote: 2qik wrote: Anyone have any Perth contacts for tailshafts? Veem Engineering, 22 Baile Road, Canning Vale Ph: 94559372 was about to mention the same place
|
|||
| Top | |
|||
| FastFutura |
|
|||
|
its on the back of your slip when ya go to the drags
i need a new shaft, cos too much clutch droppin has made unis sloppy, for ya track racing could you simply remove the speedo cog on the side of the gearbox, then car wouldn know how fast its going.. its a simple job. 1 screw on driver side of manny box. also xr's may not have max top end (like 250+) cossa lower ratio (3.45 diff) instead of ya stockky 3.08.
_________________ 94 ED Futura, 5spd, RPM clutch,3.27 LSD, PH4480 pacemakers, 2.5'' Supercat, STG 2 Wade1004-112 advanced16degrees, XH intake K&N panel,pedders superlows, Expursuit puter. clearindicators, volvoTT thermofan
|
|||
| Top | |
|||
| Johnson stroker |
|
|||
|
I can crack 230km\h on the front straight at eastern creek.
stand on the brakes and get the car to pull up confidently lap after lap with no fade.
_________________
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 68 guests |
