|
| 95fairmont |
|
||
|
Gday mates! I was wondering if anybody has tried a 'system reset' on their EF ACC (depressing 'MODE' and 'OFF' button simultaneously). I tried it the other day....the manual says that "wait 20 seconds as the system resets itself. During this time all setments of the display are illuminated. At the end of 20 seconds a CODE will be displayed."
Well, at the end of 20 seconds, I got a code which says "E2". Is "E2" suppose to be the code I should normally get? I'm just a bit concerned that it might mean an Error 2 code or something. I hope someone can enlighten me. Cheers and thanks in advance for the help. |
||
| Top | |
||
| concorde |
|
|||
|
thats a blender motor error on the heater box. its either obstructed or out of range. i had the same problem in my concorde.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
| Top | |
|||
| 95fairmont |
|
||
|
concorde wrote: thats a blender motor error on the heater box. its either obstructed or out of range. i had the same problem in my concorde.
How did you go about solving the error? Can you give me some needed suggestions? Thanks again. |
||
| Top | |
||
| concorde |
|
|||
|
i oriced up getting a new blender motor form ford installed, before i started working at ford, they wanted around $1000 for it.
i left it for a few weeks, reset it again a few times and it came good. no more errors and works fine now. my advice, try resetting it a few more times. all the functions still work but not to their full capacity (eg with air con on it might not be as cold).
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
| Top | |
|||
| 95fairmont |
|
||
|
$1000%&@$%! I guess its worth leaving it a few weeks and a few more resets. I hope it works. Thanks.
|
||
| Top | |
||
| 95fairmont |
|
||
|
Still having the 'E2' errorcode, I tried all the different temperature settings on the ACC. The airconditioning is responding very well but when I put the setting on 32 degrees, air is blowing on my feet but I'm not getting any hot air.
Anyone? |
||
| Top | |
||
| 95fairmont |
|
||
|
Still having the 'E2' errorcode, I tried all the different temperature settings on the ACC. The airconditioning is responding very well but when I put the setting on 32 degrees, air is blowing on my feet but I'm not getting any hot air.
So what does this blender motor actually do? Thanks again. |
||
| Top | |
||
| concorde |
|
|||
|
the blender motor is a flap that controls how much hot or cold air is passed through, for example when you have the temp at 16 degrees is will move across and close off the hot duct and vice versa for hotter temp.
it may just be stuck, you don't really need hot air the moment though do you? i left mine for a few weeks and tried again and it was fine.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
| Top | |
|||
| Waggin |
|
|||
|
You can get a complete new air/heater box from a wrecker to suit the Climate Control equipped cars for a few hundred dollars. Pull the blend door motor off that.
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| concorde |
|
|||
|
its the thought of pulling all my dash out that scares me.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
| Top | |
|||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
its easy to replace...i did it in our fairomnt....and the detail are on the site somewhere...i'll dig it up for ya
here's a link for it too
http://www.fordmods.com/phpBB2/viewtopi ... 4305#74305
_________________
|
|||
| Top | |
|||
| MAX |
|
|||
|
Had to change my blend door servo motor on my ef fairmont paid $95 from a wrecker not that hard of a job to take the dash out and put it back in.
|
|||
| Top | |
|||
| voids |
|
|||
|
concorde wrote: i oriced up getting a new blender motor form ford installed, before i started working at ford, they wanted around $1000 for it. $1000 ? friendly motors ford in mackay Quoted me $400 - $450 to replace the blend door its self. gettin it fixed in friday
i left it for a few weeks, reset it again a few times and it came good. no more errors and works fine now. my advice, try resetting it a few more times. all the functions still work but not to their full capacity (eg with air con on it might not be as cold).
_________________ '96 DF II LTD 6cy |
|||
| Top | |
|||
| 95fairmont |
|
||
|
mitch_anderson wrote: its easy to replace...i did it in our fairomnt....and the detail are on the site somewhere...i'll dig it up for ya
here's a link for it too http://www.fordmods.com/phpBB2/viewtopi ... 4305#74305 Got it! Thanks mate. I'll give it a couple of weeks, if nothing happens then I'll open her up. Cheers! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Majestic-12 [Bot] and 94 guests |
