is it possible ? i just brought one and someone on on the perth e series forum said it may not work , is this true? if so how exstensive will the modification needed to make it fit be?
cheeres

hi
it will work there is a few threads on this..

i just did a el bbm into my ea its fairly easy if your good with engines and wiring..

the manifold will fit straight on but you need the ef thermostat housing and heater pipe(the one that runs from the waterpump and runs around the back of the engine) and the pipe from the thermostat housing as the eb one will hit the manifold..
with the wiring you can use the eb manifold loom you just have to extend the wires for the tps and the isc..
otherwise the only other issue is the switch for the bbm.. you can use a rpm switch to activate the bbm runners but i think its not to good(i have pinging issues with it set up this way)because of the different fuel and timing maps...
your best option is to get a el ecu and run the extra wires for the bbm switch...
thats what im doing in the next day or so..
.....................................................................................................

oh ok thanks mate yea i got the ecu with the kit so hopefully this will eliminate the need for a switch? , will have to visit wreckers for thermo housing and hose
thanks a bunch mate uv been heaps of help
post back and tell us how it gose(power etc)
cheeres

you say you got the ecu? if its a ef ecu it won't
plug into the eb loom ...because ef use coil packs like the au..
and el have a distributor like eb and ed..
so you might have to get a el ecu as it will plug straight into your loom...

ill let you know how mine goes.......

aww s**t that aint good news....the bloke said that it should plug up to the EBII hmm i mite try and source some coilpacks then? becuse i dont really want to go and buy another ecu..hopefully i can figure somthing out
thanks again for your help

you need a hell of a lot more than just the coil packs to make it work. To be honest its not even worth trying, just get an EL ecu.

just thinking is there any modification i chould do to rig up the ef ecu ?

aww bummer .. i just forked 250 and now i find out the ecu wont work damn as it was one of the police issue ones...hmm meh i supose all the other parts where worth it thanks all it good to know these things in advance still a shame im gonna hvae to extend my buget a bit