|
| twr7cx |
|
|||
|
Pretty sure that I have stuffed up the alignment of the crank angle sensor. Is there any way for me to check (while the engine is still out with the manifold off and engine at TDC)?
|
|||
| Top | |
|||
| twase |
|
|||
|
Can't really align the crank sensor, do you mean the Cam Angle Sensor?
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: Can't really align the crank sensor, do you mean the Cam Angle Sensor? The one just above the oil filter. Has a cog on it, goes in the same place as I assume a distributor would on on EL. |
|||
| Top | |
|||
| Krytox |
|
|||
|
Put the crank on TDC.
Now with the synchronizer out, rotate the gear untill the hole on the side aligns up to the inside grove. Stick a rivet in there, and slide it in the dizzy hole, twisting it home, remove the rivet and bolt it down without moving.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| twr7cx |
|
|||
|
Cheers, will try tomorrow.
|
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: Put the crank on TDC. Now with the synchronizer out, rotate the gear untill the hole on the side aligns up to the inside grove. Stick a rivet in there, and slide it in the dizzy hole, twisting it home, remove the rivet and bolt it down without moving. Worked thanks. |
|||
| Top | |
|||
| EFFalcon |
|
|||
|
what symptoms were you getting to suggest it wasnt lined up?
or had you not even started it yet?
_________________ FALCN6 - EF GLi Turbo, 20" Rims, Air Bag Suspension, Straight LPG, 225rwkw |
|||
| Top | |
|||
| twr7cx |
|
|||
|
{USERNAME} wrote: what symptoms were you getting to suggest it wasnt lined up? or had you not even started it yet? Engine wasn't back in the car yet. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 83 guests |
