|
| Matt_jew |
|
||
|
Remove the trigger plug off the starter solenoid and put a wire with a terminal on it in its place and jump it straight off the battery.
If it starts first go then its something in the control cct. If it is something in the starter motor it should not turn over when its hot wired. I think I have a spare starter motor here. Could be a fault with the BCM. I had the issue in my dark blue EB and a mate had it too in his EB Ghia. Both exactlythe same symptoms.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| TROYMAN |
|
||
|
yes there is a red wire in the manifold loom that goes to the starter motor
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Well i am out of light, so work will sall til friday when it is my turn around between days and nights. I have the battery on charge and am hoping that will solve it. It appears using the battery to jump Hans LTD may have hurt it.
Will wait a couple of hours and see. I cant seem to get at the starter Matt, so will leave it til friday. I have to swap the acc pedal over yet, but cant do that til i turn the car around, and i cant start it so that is on hold as well. Heres hoping she is just a flat battery. Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| TerroristGHIA |
|
||||||||
|
Will check that shortly,
Here are some pics as it stands
_________________ The Terrorist ED Retired due to RUST. |
||||||||
| Top | |
||||||||
| Matt_jew |
|
||
|
Well that sucks.
There is a battery here in the wreck dude. Dunno how good it is but it was starting the car before I killed it.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Battery is fine, Troy, where exactly does the red wire plug onto. I have found a red wire with a black plug on the end, It seems to be excess and moe than likely goes to the starter.
I cant see to see anywhere that it would plug into though. Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
brett are you aware that you also need to change the rocker cover, as the accelerator cable bolts to it..
unless you make a bracket up...???? |
||
| Top | |
||
| TROYMAN |
|
||
|
TerroristGHIA wrote: Battery is fine, Troy, where exactly does the red wire plug onto. I have found a red wire with a black plug on the end, It seems to be excess and moe than likely goes to the starter. I cant see to see anywhere that it would plug into though. Brett it clips on the solinoid right next to where the battery cable is... |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Yep, sorted. She starts, doesn't want to idle real well, and yes i know about the rocker cover. I was going to just use the attachment from the EF cover so i have a bracket.
Success, and i am a moron for not plugging the starter in. Will have it sorted by Friday all things being equal. I had it running using my had but it seemed to be firing on 5 cylinders, so will need to check the leads and ensure thaat they are on and in the correct order. I will say the BBM gives better access to the dizzy, but only just, or and i seem to have developed a vacuum leak, although i know where it is coming from, the tree at the back of the manifold, just need to plug it. Thanks for the help guys. Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
Lastly, i read in Benj's EL conversionthat it ran rough and wouldn't rev due to fuel lines being on back the front, got a feeling that may be my issue. Too dark to check now so will put it off til friday.
Thanks for the assist guys Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| BenJ |
|
||
|
No mate, that won't be it. When the fuel lines were reversed it wouldn't fire at all.
Well done on getting to this stage. Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Thanks Benj, I appreciate it. I am not happy i have to work tomorrow as i really wnat it sorted. Am hoping its a lead not on properly or at worst i may have damaged a plug when changing the leads. Firing order is 153624 yea, same as the X flows
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| BenJ |
|
||
|
Also check that the Map Sensor Vac pipe is plugged in to the Map Sensor and the BBM.
Cheers BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| Matt_jew |
|
||
|
Yep the firing order is correct. I just checked it in the manual.
Actually if you have a vacuum leak off the tree is the map sensor connected?
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| TROYMAN |
|
||
|
what injectors did you use??
was the ef engine a runner? if not, fit the ed injectors and also check that all the injector plugs are on properly |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 95 guests |
