Fordmods Logo

ef fairmont (work in progres) 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: ef fairmont (work in progres)
Posted: Sat Jan 10, 2009 6:26 pm 
Oompa Loompa
Offline

Posts: 45

Joined: 10th Jan 2009

Ride: ef fairmont

Location: wellington
New Zealand

:lol:

i have a 1995 ef fairmont at the moment i have added a pod filter (in air box) taken out rear mufler almost changed all bushes to nolathane. put in gt gas shocks with lowering springs and i am also painting it black this weekend. i live in new zealand so parts for it arnt that cheep or findable lol.

but i was wanting to know a few things beceause i am wanting to get a bit more power out of it. so far i have in mind an exaust system and maby some head and cam work any sugestions are welcome this is the first ford i have ownd.

also is there anything you can do with the verable intake manafold to get more power.

 

_________________

1995 ef fairmont i6 4.0

coby headers, high flow simota filter
monro gt shocks at front, kyb heavy dutys in rear
colby super low springs

Top
 Profile  
 
 
Posted: Sat Jan 10, 2009 6:38 pm 
Getting Side Ways
Offline

Posts: 1220

Joined: 11th Nov 2007

Ride: f6 rspec

Location: Sydney
NSW, Australia

http://www.fordmods.com/forums/3-9l-4-0 ... e-t66.html

intake (CAI)

exhaust (including extractors)

cam

diff gears

head work
Top
 Profile  
 
 
Posted: Sat Jan 10, 2009 9:20 pm 
Oompa Loompa
Offline

Posts: 45

Joined: 10th Jan 2009

Ride: ef fairmont

Location: wellington
New Zealand

ok sounds good, how about the verable length intake can anything be done with that

 

_________________

1995 ef fairmont i6 4.0

coby headers, high flow simota filter
monro gt shocks at front, kyb heavy dutys in rear
colby super low springs

Top
 Profile  
 
 
Posted: Sat Jan 10, 2009 9:43 pm 
Oompa Loompa
Offline

Posts: 45

Joined: 10th Jan 2009

Ride: ef fairmont

Location: wellington
New Zealand

i just found a police spec ecu for my fairmont what exactly will this do apart from remove speed cut

 

_________________

1995 ef fairmont i6 4.0

coby headers, high flow simota filter
monro gt shocks at front, kyb heavy dutys in rear
colby super low springs

Top
 Profile  
 
 
Posted: Sat Jan 10, 2009 10:17 pm 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

Will be slightly more aggressive.

Will alter shift points, it'll hold off going into 4th gear until after 80kph.

Will make your penis larger.

You'll loose the correct ecu for the climate control (nothing you'll notice tho)
I think the Fairmont Ecu's optimize engine rpm, speed and temps to help the climate control a little better, but i could be talking s**t :/

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Sun Jan 11, 2009 7:45 am 
Oompa Loompa
Offline

Posts: 45

Joined: 10th Jan 2009

Ride: ef fairmont

Location: wellington
New Zealand

ok thanks it might be worth a look at than. i wont worry about climate control iv allready had to change ecu cos the old 1 wouldent let it idle proprley

 

_________________

1995 ef fairmont i6 4.0

coby headers, high flow simota filter
monro gt shocks at front, kyb heavy dutys in rear
colby super low springs

Top
 Profile  
 
 
Posted: Sun Jan 11, 2009 7:52 am 
Technical Contributor
Offline
User avatar

Age: 45

Posts: 4093

Joined: 20th Mar 2005

Gallery: 2 images

Ride: 2.0 Turbo VW

Power: 142 rwkw

Location: Seaford State:
VIC, Australia

Clean or replace the ISC:
read:
http://www.fordmods.com/forums/Common-Problems-d23.html

 

_________________

Carefree, we may not be number one, but we're up there.

Top
 Profile  
 
 
Posted: Sun Jan 11, 2009 5:07 pm 
Oompa Loompa
Offline

Posts: 45

Joined: 10th Jan 2009

Ride: ef fairmont

Location: wellington
New Zealand

i did that nothing workd acording to ford there is a resistor that craps out in the ecu and prevents it from learning how to idle agagin so i just replaced it with one from a falcon futura

 

_________________

1995 ef fairmont i6 4.0

coby headers, high flow simota filter
monro gt shocks at front, kyb heavy dutys in rear
colby super low springs

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 66 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 29, 2024 12:58 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names