|
| largey |
|
|||
|
fuel filter is stuck on any advice to get it off thanks
_________________ ef futura in the process of doin her up nice and neat it will be |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
may need to use some flare nut wrenches, designed especially for doing this type of job.
otherwise if the nut heads are starting to round off, id use some good vise grips to get it apart. then u may need to go to the wreckers and find another good pipe. |
|||
| Top | |
|||
| largey |
|
|||
|
Kk will go get some flared nut wrenches and see how that goes thanks for advice
_________________ ef futura in the process of doin her up nice and neat it will be |
|||
| Top | |
|||
| XRfairmont67 |
|
|||
|
so first of all work out what size wrenches u need. this is what they look like, kind of a ring spanner stlye with a cutout to slip it over a pipe
Attachment: Flare nut wrench.jpg [ 259.7 KiB | Viewed 149 times ] |
|||
| Top | |
|||
| largey |
|
|||
|
yea i need a 14 mm ay its so fn tight on there lol i tried with normal spanner but it started to bend the pipe so i stop
_________________ ef futura in the process of doin her up nice and neat it will be |
|||
| Top | |
|||
| MickEBS |
|
||
|
If the nut rounds it's possible to by special vice grips that have sorta a trianglar top jaw which enables them to grab rounded nuts etc very tightly. Alot better than normal vice grips.
|
||
| Top | |
||
| EL__Fairmont |
|
|||
|
use large vice grips..................work for me with the original ford fuel filter on the EL...
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| kelv_05ef_wagon |
|
||
|
if worst comes to worst cut it out cut the fuel line pipe each side of the filter about 5 cm back and replace with some fuel line and a normal fuel hose filter and hose clamps
_________________ xb falcon 500: currently being striped for full respray |
||
| Top | |
||
| largey |
|
|||
|
Hopefully it doesn't come to the worrst ay ill try vice grips than if that doesn't work ill go with fuuel line idea thanks guy
_________________ ef futura in the process of doin her up nice and neat it will be |
|||
| Top | |
|||
| Troy |
|
||
|
i had the same problem, still havent got it off yet tho only tried once then forgot about it.
hose clips are so much easier |
||
| Top | |
||
| Krytox |
|
|||
|
If you get it off successfully, replace it with an ALLOY filter, some brands use steel and require greater torque to seal, alloy being softer seals at lower torque.
resulting in easier removal.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| largey |
|
|||
|
thanks guys will update today bout how it all goes
_________________ ef futura in the process of doin her up nice and neat it will be |
|||
| Top | |
|||
| largey |
|
|||
|
the right tools for the job make everything so easy lucky i changed it stuff coming out was so dark looked green thanks for all ure help
_________________ ef futura in the process of doin her up nice and neat it will be |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 76 guests |
