Fordmods Logo

EF Head 

 

Page 1 of 2 [ 16 posts ] Go to page 1, 2  Next

 
 Post subject: EF Head
Posted: Tue Jul 29, 2008 11:25 am 
Getting Side Ways
Offline

Posts: 783

Joined: 15th Jan 2008

Ride: Pink Lancer On Spinners

Location: Melbourne
VIC, Australia

Now im kinda confused on the matter.

What actually goes? The gasket or does the head just obtain a small leak ?
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 1:23 pm 
Getting Side Ways
Offline
User avatar

Posts: 2943

Joined: 24th Jan 2005

Gallery: 18 images

Ride: XW, EL, Territory, VFR800

Power: 129 rwkw

Location: Adelaide
SA, Australia

Usually the head gasket mate.

The head sometimes corrodes and causes leaks out the side or into the cylinder.

Check a few things things...
1. Is it using coolant up? If it is then there is probably a leak from one of the coolant ducts either out the side of the motor or into a cylinder.
2. Is the engine oil milky at all? If it is then there is more than likely a leak into one of the cylinders.
3. Get a compression test done and see if any of the cylinders are down on compression. If two cylinders are down then there is probably a gasket blow out between those two cylinders.

Hope that helps mate.
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 1:31 pm 
Getting Side Ways
Offline

Posts: 783

Joined: 15th Jan 2008

Ride: Pink Lancer On Spinners

Location: Melbourne
VIC, Australia

Thanks i was just wondering as im lookn at getn a ef / el.

So say i get the car all is fine i heard alot of people put the AU gasket in to prevent the head from corroding at all eliminating the problem.

How much does this cost to get done
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 1:45 pm 
Getting Side Ways
Offline
User avatar

Posts: 2943

Joined: 24th Jan 2005

Gallery: 18 images

Ride: XW, EL, Territory, VFR800

Power: 129 rwkw

Location: Adelaide
SA, Australia

Using an AU head gasket will not prevent the head from corroding.

Using good coolant will prevent head corrosion.

Au head gaskets are metal core gaskets and are therefore stronger than the pre-AU head gaskets. It just means that AU gaskets last longer as they don't blow out as easily.

The main reason that gaskets blow on 90's model Falcons is that the engine block is made from cast iron and the head is alloy. This means that the head and the block expand and contract at different rates when they heat up and cool down.

As for the good old "how much will it cost?" question. Honestly, how long is a piece of string? I've seen people pay mechanics as much as $2500 to do a head gasket changeover.

I did mine myself for under $250.

Mechanics usually charge at least $1000 to do a head gasket.
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 1:52 pm 
Getting Side Ways
Offline

Posts: 783

Joined: 15th Jan 2008

Ride: Pink Lancer On Spinners

Location: Melbourne
VIC, Australia

hmmm how mechanically minded do you have to be to do it though lol
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 2:06 pm 
Getting Side Ways
Offline

Age: 37

Posts: 1798

Joined: 14th Jun 2006

Gallery: 7 images

Ride: FG 50th Anni G6E Turbo

Location: Melbourne
VIC, Australia

So what time are we looking at this car!?
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 2:08 pm 
Getting Side Ways
Offline
User avatar

Posts: 2943

Joined: 24th Jan 2005

Gallery: 18 images

Ride: XW, EL, Territory, VFR800

Power: 129 rwkw

Location: Adelaide
SA, Australia

Buy a Gregory's manual for your car and follow the instructions to the letter.
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 2:24 pm 
Getting Side Ways
Offline

Posts: 783

Joined: 15th Jan 2008

Ride: Pink Lancer On Spinners

Location: Melbourne
VIC, Australia

Haha dodd i cant go 2nite i have to play at 8 ! What are u doing 2moz sinceur bday and all. I heard ud love to look at cars on ur bday :P
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 2:34 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2097

Joined: 5th Nov 2004

Ride: egas bf xt

Location: Gosford
NSW, Australia

Why fix it if it aint broke? Do the head gasket if the current one blows...

 

_________________

I can see through wooden doors.

Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 3:25 pm 
Getting Side Ways
Offline

Posts: 783

Joined: 15th Jan 2008

Ride: Pink Lancer On Spinners

Location: Melbourne
VIC, Australia

Because id prefer not to be on my way or at drag day and have the head f**k up on me or something. Its going to go sooner or later so why not prevent it :)
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 4:34 pm 
Getting Side Ways
Offline
User avatar

Age: 39

Posts: 2097

Joined: 5th Nov 2004

Ride: egas bf xt

Location: Gosford
NSW, Australia

Are you going to buy new brake pads, new clutch, new tires as well?? It's your money but it seems like a pointless exercise to me..

 

_________________

I can see through wooden doors.

Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 4:57 pm 
Getting Side Ways
Offline

Posts: 6113

Joined: 8th May 2007

haggis wrote:
Are you going to buy new brake pads, new clutch, new tires as well?? It's your money but it seems like a pointless exercise to me..


Because the results of a cooked head can be more costly than the other things you mentioned. Or the symptoms of a leaking headgasket can cause you to pull your hair out thinking its something else

I'll be doing the same thing if i ever buy another e-series
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 7:03 pm 
Getting Side Ways
Offline

Posts: 783

Joined: 15th Jan 2008

Ride: Pink Lancer On Spinners

Location: Melbourne
VIC, Australia

haggis wrote:
Are you going to buy new brake pads, new clutch, new tires as well?? It's your money but it seems like a pointless exercise to me..



Thats stupid

Changing the head gasket is preventing a larger problem.

Doing any of those is not.
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 7:11 pm 
Getting Side Ways
Offline

Age: 37

Posts: 1798

Joined: 14th Jun 2006

Gallery: 7 images

Ride: FG 50th Anni G6E Turbo

Location: Melbourne
VIC, Australia

scottlah wrote:
Haha dodd i cant go 2nite i have to play at 8 ! What are u doing 2moz sinceur bday and all. I heard ud love to look at cars on ur bday :P


Nup... lol got the rest of the week off... heading to adelaide on friday, so thursday??

Also, spoke to my uncle. Can get you an AU gasket no worries.
Top
 Profile  
 
 
Posted: Tue Jul 29, 2008 7:18 pm 
Getting Side Ways
Offline

Posts: 783

Joined: 15th Jan 2008

Ride: Pink Lancer On Spinners

Location: Melbourne
VIC, Australia

sick..
well ill prob come see u some time 2moz if ur free neway for ya bday, get on the beers son
haha
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 16 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Google Adsense [Bot] and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Fri Nov 29, 2024 1:31 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names