Fordmods Logo

EF motor dramas 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: EF motor dramas
Posted: Tue Feb 23, 2010 6:54 pm 
Tyre Shredder
Offline

Age: 36

Posts: 379

Joined: 17th May 2006

Gallery: 26 images

Ride: 2003 BA XR6 TURBO!!!!!

Location: Melbourne
VIC, Australia

hey guys,
long time no see.
i had a problem develop saturday night which has got me stumped.
symptoms are:
temp gauge died, just sits at bottom.
thermo fans r stuck on as long as ignition is on
performance is severly lowered- feels/sounds like its gonna blow up at 3500rpm
exhaust crackeling like a v8 supercar under gentle deceleration ie. when i lift my foot off throttle.

first throught was dead coolant temp sensor so i changed that, no difference.
i then noticed my J3 chip was hanging half in half out of the ecu (still waiting for final tune so i didnt put case back on)

im concerned that i could have shorted the ecu or the j3 chip.
i have just disconnected the battery to reset the ecu just incase that helps.

air con diagnostics reads that the engine temp sensor and the coolant temp sensor are faulty (errors 7 and 8 i think)

anyone got any thoughts?
cheers, Adam
Top
 Profile  
 
 
 Post subject: Re: EF motor dramas
Posted: Tue Feb 23, 2010 8:31 pm 
Getting Side Ways
Offline

Age: 36

Posts: 1538

Joined: 4th May 2006

Gallery: 4 images

Ride: ef fairmont turbo

Power: 213 rwkw

Location: melbourne
VIC, Australia

if your j3 was half in half out, that could and most likely would make your electronics go stupid, try and plug the j3 in and see if it makes a difference, if not take it out and see if that makes a difference, i no of people having trouble with a dirty inlet on a j3, so defiantly worth having a muck around with that

 

_________________

96 EF FAIRMONT
Garrett gt40turbo, iceman plenum, ported head, turbo cam, double valvesprings, 023 fuel pump, 36lb injectors 4' cat, 4' dump, 2.5 exhaust, build bottom end, hypertonic pistons rods & rods, king bearings, j3. c10 3500 stall
232rwkw@4psi

Top
 Profile  
 
 
 Post subject: Re: EF motor dramas
Posted: Tue Feb 23, 2010 9:32 pm 
Tyre Shredder
Offline

Age: 36

Posts: 379

Joined: 17th May 2006

Gallery: 26 images

Ride: 2003 BA XR6 TURBO!!!!!

Location: Melbourne
VIC, Australia

tryed the ecu reset and blew the j3 chip out, put it back in.
no good.

whats the chance ive stuffed the chip or ecu?
otherwise any other suggestions?
Top
 Profile  
 
 
 Post subject: Re: EF motor dramas
Posted: Wed Feb 24, 2010 2:10 pm 
Getting Side Ways
Offline

Age: 36

Posts: 1538

Joined: 4th May 2006

Gallery: 4 images

Ride: ef fairmont turbo

Power: 213 rwkw

Location: melbourne
VIC, Australia

wouldn't have a clue mate, never had much experience with ecu so i dont no how sensitive they are, try running the car with out the j3 and see if it has the same symptoms

 

_________________

96 EF FAIRMONT
Garrett gt40turbo, iceman plenum, ported head, turbo cam, double valvesprings, 023 fuel pump, 36lb injectors 4' cat, 4' dump, 2.5 exhaust, build bottom end, hypertonic pistons rods & rods, king bearings, j3. c10 3500 stall
232rwkw@4psi

Top
 Profile  
 
 
 Post subject: Re: EF motor dramas
Posted: Wed Feb 24, 2010 6:57 pm 
Tyre Shredder
Offline

Age: 36

Posts: 379

Joined: 17th May 2006

Gallery: 26 images

Ride: 2003 BA XR6 TURBO!!!!!

Location: Melbourne
VIC, Australia

yeah seemed the same so i assume ive blown the chip :(

is it possible that i shorted the ecu and its only effected the coolant temp sensor and engine temp sensor?
or would the car not run at all?
Top
 Profile  
 
 
 Post subject: Re: EF motor dramas
Posted: Wed Feb 24, 2010 8:10 pm 
Tyre Shredder
Offline

Age: 36

Posts: 379

Joined: 17th May 2006

Gallery: 26 images

Ride: 2003 BA XR6 TURBO!!!!!

Location: Melbourne
VIC, Australia

problem solved thanks to paul from CVE and 4dlvr

turned out i shorted out the J3.
pulled it out and symptoms stopped.

thankfully paul saves everyones tunes so its not gonna be costly to fix.
Top
 Profile  
 
 
 Post subject: Re: EF motor dramas
Posted: Thu Mar 04, 2010 9:50 am 
Getting Side Ways
Offline
User avatar

Posts: 1139

Joined: 27th Feb 2005

Ride: Supercharged EF Fairmont

Location: T.I. Performance HQ
VIC, Australia

Make sure it's installed properly, as per the instructions, with a thick bit of gaffa or duct tape to keep it on the socket. Last thing you want is it coming off on a bumpy road.

Jason
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 77 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 1:25 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names