|
| SLY40L |
|
||
|
Just wondering if a Tickford AU III XR8 snorkel would fit an EF Gli standard box?
Thanks! - Tom |
||
| Top | |
||
| Krytox |
|
|||
|
yes, but may foul on the thermo fans like mine did (used a paint gun and remoulded it)
also you need to trim an edge off it, but otherwise presto!
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| SLY40L |
|
||
|
may be foul on thermo fans? sorry i have no idea what that means...
|
||
| Top | |
||
| nannas_ed |
|
|||
|
OsbornThomas wrote: may be foul on thermo fans? sorry i have no idea what that means...
the intake snorkel will hit the thermo fans, thus not making them a direct fit.
_________________
|
|||
| Top | |
|||
| SLY40L |
|
||
|
oh ok, so it's not really the best idea for a modification? not sure if it's just in my head atm but I'm really into getting more air into my engine haha
|
||
| Top | |
||
| joshannon.7 |
|
||
Age: 42 Posts: 296 Joined: 16th Oct 2006 Ride: 94 EF (OPT20), TF Cortina Ghia Location: Bendigo |
you get a bit of a gain but not much. The EF\EL GT snorkels fit too. Not a bad idea especialy if your gonna do some bigger mods. Cam etc. Typicly about 3-4 kw. so stuff all. but every little bit adds up i spose. and its this whole synergy thing. ie say 3 bolt on mods say rated for a gain of 10 kw each but for some reason they all work well together and produce 35kw.
_________________ "Look I found tape, I'm a mechanic now!!!" Mike Teutul |
||
| Top | |
||
| CaRtZ |
|
|||
|
BA XT and XR6T have both fit striaght on my EF with no modification. to get more air im looking at drilling a hole throught the bottom of the air box as i have a GLI (no fog lights in the front bumper) with no fill-in/replacement plastic, so it will be cold air stright into the box... im also looking at and inbox pod filter setup for more surface area of filtratrion
_________________ 99.6 RWKW
|
|||
| Top | |
|||
| SLY40L |
|
||
|
Thanks a lot guys! helped me a lot!
Someone has put in a bid for $40 surely it's not worth that much? is it? |
||
| Top | |
||
| EL__Fairmont |
|
|||
|
OsbornThomas wrote: Thanks a lot guys! helped me a lot!
Someone has put in a bid for $40 surely it's not worth that much? is it? you can't buy the Tickford snorkels new anymore, so you have to get a BA series snorkel. I have seen the tickford ones go for over $100 on EBAY. I bought one about a year ago from Ford Spare Parts and it was $26.
_________________ 97 EL Fairmont 4l OHC .Silver. |
|||
| Top | |
|||
| SLY40L |
|
||
|
oh, makes sense then! What doesn't is the SS inductions ones going for over $250!
|
||
| Top | |
||
| Private9 |
|
|||
|
Basically a straight, but tight fit. You will need to trim the bottom lip, and drill 2 new holes in your radiator support panel but shouldn't take more than 10-15 minutes all up.
|
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 70 guests |
