|
| ahmedkayihan |
|
||
Age: 33 Posts: 123 Joined: 21st Mar 2011 Ride: four wheels and an engine Location: right over there... |
Hi guys,
I have an AU I xr6 engine in my EL ghia. However, I wanna put an EF stage 2 cam onto it. I heard it was possible as long as you put the E series rocker gear onto it. Right? thanks |
||
| Top | |
||
| creeture3 |
|
||
|
yep
|
||
| Top | |
||
| ahmedkayihan |
|
||
Age: 33 Posts: 123 Joined: 21st Mar 2011 Ride: four wheels and an engine Location: right over there... |
thank you sir!
|
||
| Top | |
||
| Disco Frank |
|
|||
|
you sure????
i thought the cam journals where a different size actually im pretty sure they are you could put a E series head on the au engine and then use the e series cam
_________________ RIP SCOTT |
|||
| Top | |
|||
| ahmedkayihan |
|
||
Age: 33 Posts: 123 Joined: 21st Mar 2011 Ride: four wheels and an engine Location: right over there... |
il give it a go and see how it all turns out...
check out my other thread of el stumbling during acceleration sir.. i would appreciate any feedback  thanks!
|
||
| Top | |
||
| Barnfind-EA |
|
||
|
100% Au cam will not fit in E series.. period.
Does not matter what rocker gear because as mentioned previously, the journal, or the rotating thingy part that is held by the head is going to be different. |
||
| Top | |
||
| ahmedkayihan |
|
||
Age: 33 Posts: 123 Joined: 21st Mar 2011 Ride: four wheels and an engine Location: right over there... |
OK I see. Thank you for that..
Now I need an AU can for my EL. Any AU modified cam. Stage 2,,3, mild, heavy, race etc I'm open for offers. Let me know if you have an AU cam for me
|
||
| Top | |
||
| Disco Frank |
|
|||
|
{USERNAME} wrote: 100% Au cam will not fit in E series.. period. Does not matter what rocker gear because as mentioned previously, the journal, or the rotating thingy part that is held by the head is going to be different. it will if the engine is a hybrid but then it has an AU head  no an e series head
_________________ RIP SCOTT |
|||
| Top | |
|||
| ranga83 |
|
||
|
Plenty of people have ran e series cams in au heads. Just use the corresponding rocker gear to the cam as au are 1.8 rocker ratio, e series are 2:1. I tuned one not long ago running e series cam in au head, and i myself will be doing it shortly
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| Disco Frank |
|
|||
|
{USERNAME} wrote: Plenty of people have ran e series cams in au heads. Just use the corresponding rocker gear to the cam as au are 1.8 rocker ratio, e series are 2:1. I tuned one not long ago running e series cam in au head, and i myself will be doing it shortly impossible dude the cam journals are different sizes and will not work!
_________________ RIP SCOTT |
|||
| Top | |
|||
| ranga83 |
|
||
|
So whu does the FACTORY workshop manuals ( au and ef) state journal size is the same?
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| ahmedkayihan |
|
||
Age: 33 Posts: 123 Joined: 21st Mar 2011 Ride: four wheels and an engine Location: right over there... |
My engine is an AU1 XR6 Engine.
Will it work? |
||
| Top | |
||
| snap0964 |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: Plenty of people have ran e series cams in au heads. Just use the corresponding rocker gear to the cam as au are 1.8 rocker ratio, e series are 2:1. I tuned one not long ago running e series cam in au head, and i myself will be doing it shortly impossible dudethe cam journals are different sizes and will not work! Well I achieved the impossible today - an AU VCT cam fits onto an E series 94DT head without a problem.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
{USERNAME} wrote: {USERNAME} wrote: {USERNAME} wrote: Plenty of people have ran e series cams in au heads. Just use the corresponding rocker gear to the cam as au are 1.8 rocker ratio, e series are 2:1. I tuned one not long ago running e series cam in au head, and i myself will be doing it shortly impossible dudethe cam journals are different sizes and will not work! Well I achieved the impossible today - an AU VCT cam fits onto an E series 94DT head without a problem. is it a hybrid e series? then yes it will fit
_________________ RIP SCOTT |
|||
| Top | |
|||
| SWC |
|
||
|
94DT is an EF Tickford head, not a Hybrid.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
