|
| t_sar |
|
|||
|
Hi guys,
In the past month or so my car has begun to stall when braking to a stop or slowing down to go around a corner. Its really annoying because I have to keep the accelerator on so it doesn't stall. My car has no problem idling, it only stalls when comming to a stop or cornering. The fuel pump and filter were done not long ago so i know that is not the problem. I have also checked the pcv and that seems fine too. Thanks in advance. |
|||
| Top | |
|||
| gogetta |
|
|||
|
I would suspect the isc (idle speed controller)
_________________ |
|||
| Top | |
|||
| Waggen |
|
|||
|
Does it only do it when the fuel light is on? or when fuel is low?
|
|||
| Top | |
|||
| 93EB |
|
|||
Age: 47 Posts: 2485 Joined: 6th Oct 2005 Ride: 93EB Fairmont / BA Falcon XR6T Location: Western Sydney |
gogetta wrote: I would suspect the isc (idle speed controller) +1 The ISC may need to be cleaned out.
_________________ 93 EB II Fairmon8 with 17' EL GT's / Clear indicators / H.I.Ds / Sports exhaust / Lowered 2' / K&N / XR6 ECU. |
|||
| Top | |
|||
| t_sar |
|
|||
|
Fuel level makes no difference.
I cleaned out the ISC with WD40 when the problem began and made no difference. |
|||
| Top | |
|||
| djcustomcomputing |
|
|||
|
+1 for the isc
check the voltage at the connector going to it ignition on engine off should be 8-10volts or while the engines running unplug the connector if theres no change in idle speed try a different isc
_________________ MY BUILD THREAD |
|||
| Top | |
|||
| t_sar |
|
|||
|
Cool, thanks guys. I'll test it out. Let you know how it goes.
|
|||
| Top | |
|||
| Sommers NL |
|
|||
|
sounds like it could be a power steering switch issue ..
might be worth unpluging it and seeing if it makes any difference. Laticia.
_________________ BANNED!!!! |
|||
| Top | |
|||
| Mr_fairmont |
|
||
|
not to shure on the fords but a mates vn was doing the same thing and was the float in the fule tank might be worth a look if its the same sort of set up
good luck 
|
||
| Top | |
||
| EBMontTom |
|
||
|
Double check your map sensor hose and other vac hoses going to rear of manifold.
I seem to remember having this problem a while ago and the map sensor hose was starting to slip off its fitting on the manifold side.
_________________ EL XR6 Manual |
||
| Top | |
||
| sinisteref |
|
||
|
My ef was doing that a few months ago, turns out it was the torque controller in the gearbox.
|
||
| Top | |
||
| fiftyone |
|
|||
|
sinisteref wrote: My ef was doing that a few months ago, turns out it was the torque controller in the gearbox. got any more info on that? it may be the magical thing ive been looking for.
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| sinisteref |
|
||
|
Yeah, toruqe converter sorry, i took my car to a gearbox machanic and he fixed it.....works fine now.....bit pricey, it would be good if you could do it yourself cost about 1200 i think.
|
||
| Top | |
||
| fiftyone |
|
|||
|
sinisteref wrote: Yeah, toruqe converter sorry, i took my car to a gearbox machanic and he fixed it.....works fine now.....bit pricey, it would be good if you could do it yourself cost about 1200 i think. f**k, buy half a decent car for that
_________________ ** For Sale ** http://www.fordmods.com/ford-parts-for-sale-f17/assorted-e-series-parts-t124697.html |
|||
| Top | |
|||
| sinisteref |
|
||
|
meh, i really enjoy my ef one of the nicer cars ive driven ( way better then my old 89 excel *shudders*).....even tho it can give me the sh*ts sometimes..
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 89 guests |
