|
| king_beraldo |
|
||
|
Hi guys. Ive got the engine out of my xr6 and i need to change the timing chain. My question is, is it necessary to take the head off? or is it possible to remove and replace the timing chain cover without doing so?
|
||
| Top | |
||
| Shortshift |
|
|||
|
You can remove the timing cover without taking the head off. The sump can be loosed to make it easier to remove. That being said, most people would replace the sump gasket and rear seal while the engine is out.
_________________ AU2 XR8 with Raptor VL, ported Yella Terra GT40P heads, Scorpion 1.6 RRs, XE264HR-14 Comp Cam, ceramic coated Hurricane Headers, 60lb injectors, Walbro 255, 200cfi cats, 3" exhaust & Snow Performance water methanol injection |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Why do you need to change the timing chain ?
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| king_beraldo |
|
||
|
I had the engine out as I needed to replace sump gasket and weld up the clutch hole on the firewall, when I dropped the sump, I found a chain guide in the bottom. So may as well do the chain.
|
||
| Top | |
||
| snap0964 |
|
|||
|
Making lot of work for yourself. The chains are usually bullet proof - the guide I assume is the lower one on the timing cover. Provided it's okay, refit it to the cover and put the sump on.
As mentioned, you'd be better replacing the rear main seal, and possibly the rear welch plug.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| king_beraldo |
|
||
|
okay so i am finally getting around to this, ive removed the sump and ive removed all the bolts from the timing cover. ive used an allan key to release the tensioner but i cant seem to get the cover off. it moves around but it still seams that the tensioner is attached. what am i doing wrong? / Forgetting?
|
||
| Top | |
||
| king_beraldo |
|
||
|
Attachment: IMGP1066_resize.JPG [ 101.46 KiB | Viewed 319 times ] where could i get the tool on the right? |
||
| Top | |
||
| king_beraldo |
|
||
|
anyone? I've got the engine out of the car. Dropped the sump. I've released the tension and got the timing cover loose but can't get it off.
|
||
| Top | |
||
| phongus |
|
|||
|
Did you pull the tensioner completely out? Also the top guide bolt removed?
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 94 guests |
