|
| Smokey...Retired! |
|
|||
|
Hey all! Just when I thought things cudnt get worse for my baby after my gf crashed it, just noticed a considerable dribble of coolant betwwen the head and block on the exhaust side!
Anyway so I heard its best to use an Au head gasket? should I replace the head bolts? Im bit confused with this.... I saw these on ebay.... http://cgi.ebay.com.au/FORD-FALCON-ED-E ... dZViewItem http://cgi.ebay.com.au/FORD-FALCON-ED-E ... dZViewItem Are these the one to get? Thought the au gasket was metl though.... ANy help would be great thanks!
_________________ Blast from the past..... |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
As far as i know you need to go to Fraud for the Metal AU gasket.
The Au bolts need some grinding of the outside flange to fit inbetween the rokcer gear mounts. |
||
| Top | |
||
| Krytox |
|
|||
|
do not touch any of the 's**t' on eBay
Ford for gaskets, and bolts.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| Gaz |
|
||
|
FordFairmont wrote: As far as i know you need to go to Fraud for the Metal AU gasket.
The Au bolts need some grinding of the outside flange to fit inbetween the rokcer gear mounts. incorrect. mine were fine. didnt have to grind anything
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| my el project |
|
|||
|
hey mate,
did ur coolent mix with ur engin oil???
_________________ El Futura
|
|||
| Top | |
|||
| Smokey...Retired! |
|
|||
|
Genuine ford stuff? But isnt brands like ACL good quality from what i heard?
No its only leaking coolant between the head and the block from the water jacket holes im pretty sure....why?
_________________ Blast from the past..... |
|||
| Top | |
|||
| ebfairmont3.9 |
|
|||
|
Dont go ACL ford got it right with the AU Metal gasket.... Au's unless something goes very wrong IE big overheat etc... They dont blow head gaskets. So go with the AU metal gasket and bolts.
_________________ 1994 ED Fairmont Champaign Gold - AU Series II Intech 4.0L - EL EFI - Thermo Fans - 4.11 LSD - Pacemaker 4480 Into Custom 3" Exhaust - Shift Kit |
|||
| Top | |
|||
| Smokey...Retired! |
|
|||
|
Ok then no worries. SO ford sell the only metal head gasket? So i should change the bolts also? what else should i do the head replace valve seals etc? DOes ford sell a VRS set if so what the price?
_________________ Blast from the past..... |
|||
| Top | |
|||
| ebfairmont3.9 |
|
|||
|
dont know about the vrs kit... But yes call a few ford dealerships i have heard some dont have the metal gasket.. and yes definately new bolts the au ones. If u re-use the old ones expect broken bolts or a blown headgasket within a week.
_________________ 1994 ED Fairmont Champaign Gold - AU Series II Intech 4.0L - EL EFI - Thermo Fans - 4.11 LSD - Pacemaker 4480 Into Custom 3" Exhaust - Shift Kit |
|||
| Top | |
|||
| xpression |
|
|||
|
i dont mean to sound harsh but a headgasket is a major repair, do not attempt it unless you know what you are doing or have some1 around who does.
|
|||
| Top | |
|||
| ea_falcon |
|
||
|
got au gaskit on mine there stronger and more thinner beta for higher compresion and yes u need to change the head bolts the old ones have already stretched to fit the old head gaskit
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| xpression |
|
|||
|
also ford do sell a complete VRS kit,and at the same time its not a bad plan to change oil/filter, and get the radiator stipped/cleaned.
|
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
Gaz wrote: FordFairmont wrote: As far as i know you need to go to Fraud for the Metal AU gasket. The Au bolts need some grinding of the outside flange to fit inbetween the rokcer gear mounts. incorrect. mine were fine. didnt have to grind anything Same here, mine fitted no probs, but everyone else reckons they wont fit properly so it makes me think mine were standard issue? |
||
| Top | |
||
| Smokey...Retired! |
|
|||
|
Mate ive rebuilt an engine & done plenty of head gaskets so i know what im doing just not familiar with ford one except for my old man Ea cos ive never had to fix my falcons
So... if i get a AU VRS kit with the head bolts it should be ok? Are all the valve seals etc same? Just cos I went to ford, repco & auto one today & noone else has heard about using a AU gasket & dont advise it atall!
_________________ Blast from the past..... |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 24 guests |
