|
| c james |
|
|||
|
"The tunes I put on the J3 flatten out the spark trough normally found in an EL ECU so that it suits the log manifold. What you read is true for a stock ECU only."
thats the words from jason. i knew i told him i wasnt running the bbm with the el ecu, you dont HAVE to..... i will keep talking with jason and finding my issue.
_________________ ED Fairmont Ghia. t5 conversion w h/d exedy, 3:45:1 lsd, pacemaker extractors, 2.5" custom exhaust, waggott cam,K&N high flow panel filter, TI performance chip w/ 4 tune switch(2 ED, 2 EL tunes) king 18's, el thermo fan w/ Davis Craig switch. 5000K hids,led lighting, doof box in boot. |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Pull the fault codes from the ECU, and see if there's any relevant ones.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| TROYMAN |
|
||
|
c james wrote: "The tunes I put on the J3 flatten out the spark trough normally found in an EL ECU so that it suits the log manifold. What you read is true for a stock ECU only." thats the words from jason. i knew i told him i wasnt running the bbm with the el ecu, you dont HAVE to..... i will keep talking with jason and finding my issue. well try advance your base ignition timing a few deg and see if that helps. |
||
| Top | |
||
| galapogos01 |
|
|||
Posts: 1139 Joined: 27th Feb 2005 Ride: Supercharged EF Fairmont Location: T.I. Performance HQ |
No need to advance the timing. Pretty sure it's a lean miss, but it's hard to know without a dyno sheet/AFR trace.
Chris' original emails said he had problems before fitting the chip -- he also doesn't currently know what cam is in it, so I assumed a generic 'stage 2' type cam. He's going to get me some more info to work off and I will have another go at sorting it out! Cheers, Jason
_________________ T.I. Performance - Ford Performance Parts & Tuning - J3 Chips & Tuning, Fuel Pumps & Injectors, Camshafts, Haltech ECUs and more! |
|||
| Top | |
|||
| 984.OEL |
|
||
|
i'm trying to decide same for xg ute: j3 the stock ecu with log manifold or use an el ecu and change to bbm later....i'm leaning toward the stock option. less trouble, less money, less need for dyno time... and apart from waiting for the chip from t.i., a 2 minute upgrade. sounds like the go..
my only real concern is fuel economy anyway..basic extractors/exhaust upgrade will up the grunt enough for what i want, which is to use it as a ute!). i bet 5$ that old mates problem is the cam. he needs dyno time. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 104 guests |
