|
Sury |
|
||
|
i was wondering does the el fairmont have the same gear and diff ratio as a standard falcon?
|
||
Top | |
bry40l |
|
|||
|
Depends whats written on the tag on the diff housing, could be a 3.08, or 3.23 or a 3.45
_________________ BF XR6 |
|||
Top | |
Sury |
|
||
|
k well what would give me the most acceleration?
|
||
Top | |
bry40l |
|
|||
|
3.08 is a high ratio and the 3.45 is lower so 3.45 is good for a bit more , most/all e series xr models are fitted with 3.45 limited slip diff, you can also fit even lower ratio gears like 4.11 but you lose alot of economy with them
_________________ BF XR6 |
|||
Top | |
Sury |
|
||
|
where abouts on the housing is it writern cause i just went and had a look but i cant find it
|
||
Top | |
bry40l |
|
|||
|
Its on the back of it, where the filler plug is , theres a metal tag on it, and a sticker near it,
_________________ BF XR6 |
|||
Top | |
Sury |
|
||
|
yeah i found it thnx its 3.23 im going to get a 3.45
|
||
Top | |
bry40l |
|
|||
|
I doubt there would be much difference between the 2, unless you get an lsd one
_________________ BF XR6 |
|||
Top | |
Sury |
|
||
|
awww k no worries well thnx for ur help
|
||
Top | |
bry40l |
|
|||
|
No worrys,
_________________ BF XR6 |
|||
Top | |
TROYMAN |
|
||
|
the difference is .22... almost 1/4 turn of the tail shaft.
3.23 is close to 3 1/4 turns of the tail shaft for one rotation of the rear wheel, compared to 3,45 which is aprox 3 1/2 turns of the tail shaft for one rotation of the rear wheel.. which is slight but still notacable... |
||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 79 guests |