|
| xrbabyboy531 |
|
||
|
Just wanted to know how much work is involved with changing my el xr6 motor to a au xr6 motor and if they are fully compatable >?<
|
||
| Top | |
||
| frd906n |
|
||
|
You would have to convert ur el to coil pack, as thats what the au runs
Now u mentioned au xr6 motor, are we talking about the HP engine or the VCT engine
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| xrbabyboy531 |
|
||
|
Whats the diffrence between the 2 atm i have a el xr6 tickford motor witch i need 2 change due 2 damage.
|
||
| Top | |
||
| frd906n |
|
||
|
edit
_________________ Daily Driver, Series 1 Au Forte Quote: Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors
|
||
| Top | |
||
| SV-Valiant |
|
||
|
The AU motor is a much better and stronger motor in my opinion with a better head on it and its easy to put the AU motor into your EL just need to modify either your sump or cut a little bit out of the K Frame to fit it the latter is easier and cheaper to do if you have a welder and swap a few of the motor parts around.
I did it to my EF now has a AU motor in it and i think its been for the better. |
||
| Top | |
||
| xrbabyboy531 |
|
||
|
OK so im looking for a au xr6 motor atm so the only thing i have to do is mod the sump and it should fit right in and as for the other motor parts what do i have 2 do there what needs to be change >?<
|
||
| Top | |
||
| GeZza200 |
|
||
|
EL is dizzy, AU is coil pack. If you want to use the coil packs you are going to have to use a EF XR6 ECU or a stock EF ECU but with a Ti performance chip with the XR tune. Im sure you could put the dizzy on the AU engine so you wont have to do that mucking around.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 94 guests |