|
| bry40l |
|
|||
|
dont worry about the leads if you replaced them
_________________ BF XR6 |
|||
| Top | |
|||
| wild-el |
|
||
|
just trips me out man was working fine up untill about a week ago.
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| bry40l |
|
|||
|
definatly try and get hold of a map sensor, i did a test today for you, i unplugged mine to put it on my el as i only have one good one between 2 cars, and i had to jumpstart the el off the fairmont so i was running it with no map sensor, it was blowing fuel out the exhaust(running rich) and when i took it to 3-3500 rpm it ran just like yours, it was running rough as f**k
_________________ BF XR6 |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
I think I may have a spare map sensor from an ef. If they are compatible
_________________ El XR6 Turbo |
|||
| Top | |
|||
| SWC |
|
||
|
ef_falcon_95 wrote: I think I may have a spare map sensor from an ef. If they are compatible Same unit. |
||
| Top | |
||
| bry40l |
|
|||
|
SWC wrote: ef_falcon_95 wrote: I think I may have a spare map sensor from an ef. If they are compatible Same unit. +1 same s**t different stink 
_________________ BF XR6 |
|||
| Top | |
|||
| ef_falcon_95 |
|
|||
|
sounds like its map sensor then, someone could of bumped it while they were taking the old motor out, or hose could be cracked
_________________ El XR6 Turbo |
|||
| Top | |
|||
| wild-el |
|
||
|
ok sweet well ill definatly go and grab one from my local spears shop for a dollar (pick-apart) and ill test it.now im going to sound like a d1ck head but thats the one with one hose coming out of it and the electrical plug on the other side of it too yeah? if so then we are all on the same track if not i need a picture asap!!
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
It's black and it's above the bbm mounted to the firewall by 2 screws
_________________ El XR6 Turbo |
|||
| Top | |
|||
| bry40l |
|
|||
|
the plug goes into the bottom of it and so does the vacum pipe from the manifold
_________________ BF XR6 |
|||
| Top | |
|||
| wild-el |
|
||
|
yep thats the one i was thinnking about too will go and pick one up once this bloody rain stopss it pooring down here.
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| wild-el |
|
||
|
well i changed it still same s**t.went to bursons and ordered a dizzy cap and will be changing it tomorrow when it comes in.i hope it ssomething simple.im going to go and check the inlet manifold gasket spray abit of carby cleaner and see if it makes any difference.
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
Dont forget to replace the rotor botton aswell
_________________ El XR6 Turbo |
|||
| Top | |
|||
| wild-el |
|
||
|
rotor button?
_________________ EL xr6,standard a** au motor,hi-tech headers, 2 1/2inch red back,,Tikky kitted and wingless,Black GT-P's,on ultra lows and still too high |
||
| Top | |
||
| SWC |
|
||
|
Will you buy a Workshop Manual and read it. This is basic mechanics.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 56 guests |
