|
| willxrt6 |
|
||
|
Ive just bought and installed a EL xr6 motor for my EL wagon , apart from the issue of trying to get the torque converter back on everything went ok . my only issue being the motor turns over but wont start . nice strong spark , fuel pressure/pump good just wont start.
ive asked some questions to my local ford dealer and some mechanics and ive two answers ... 1 .i needed the computer that came with the motor or it wont run ( but it turns over ??? ) 2. it should start with the original computer with a slight drop in power 2-3 Kw's ( does not start?) any help would greatly be appreciated cheers guys . ps . shoot the ford designer for putting the starter right under the inlet manifold like that ! 
|
||
| Top | |
||
| BenJ |
|
||
|
Did you pull the dizzy out as part of the swap?
It is quite easy to install the dizzy 180 degrees out. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| willxrt6 |
|
||
|
the dizzy was not touched ( already on with leads as well) look in good nick .
just changed over thermostat/inlet manifold and throttle body solinoid/modules just in case and still no go |
||
| Top | |
||
| willxrt6 |
|
||
|
i was just checking some other posts here and found out that my new motor is a hybrid (el xr6 96DT ). would this have any thing to do with it not starting its a 97 model wagon . ive narrowed down that im not gettin fuel passed the injectors which are working . as i said earlier ive good fuel pressure and spark . and does anyone know whats the story with the hybrid motor ????
|
||
| Top | |
||
| willxrt6 |
|
||
|
scratch the hybrid question did some more reading
 . anyone anything ??????
|
||
| Top | |
||
| huggiebear |
|
|||
|
fuel lines are on backwards... it happens very easy. apart from that did you hook up the pink wire to the dizzy? it sounds like one of those 2
ECU WILL NOT ALTER WEATHER IT RUNS OR NOT, i had an EL Tickford motor with BBM and thermos running off a stock NC fairlane ECU with no problems |
|||
| Top | |
|||
| willxrt6 |
|
||
|
Got it running !! huggiebear you were right it was the fuel line !! i followed the lines exactly from the original motor and set up , but it was wrong . had a few other issues but got them going quickly very happy though . not bad for a carpenter i guess .
|
||
| Top | |
||
| phongus |
|
|||
|
willxrt6 wrote: Got it running !! huggiebear you were right it was the fuel line !! i followed the lines exactly from the original motor and set up , but it was wrong . had a few other issues but got them going quickly very happy though . not bad for a carpenter i guess . Ahh the good old fuel line reversal, got to hate that...better then not putting it on properly and losing about 2 litres of fuel all over the concrete floor, surely did clean the oil off the floor haha. Good on you and happy driving .
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| huggiebear |
|
|||
|
awesome stuff. glad you got it running. im sure you will have many happy times cruising in the wagon... i get my wagon today WOOT
|
|||
| Top | |
|||
| willxrt6 |
|
||
|
awesome thanx guys but how stupid do i feel but thats cars i guess . my wagon is an absolute heap but its a work in progress (only cost me $800) . the motor cracks awesome top end ! the car has never been so fast
gettin the paint done over christmas i hope, have a good friend with a panel shop , will put a photo up soon of the motor and keep updates , cheers guys
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 123 guests |
