|
| NCIIGHIA |
|
||
|
Ok a little help from those who know will be orsm. i have an nc ghia that i have fitted an eb tickford motor to i also have an ef engine sitting here.
and it got me thinking a little would i. (a) fit rebuilt ef engine with tickford head (b) fit all internals from ef engine into my original fairlane engine with ticky head. i would also like to know if an au mains girdle or a ba windage tray will fit either an ef or earlier engine i have heard that an ef crank has better balancing than earlier engines and since the best stock combo is from ef/el. and i would think an ef engine will fit without too much hassle with all my earlier peices like alt pwr steer and such. if i am wrong about any of this tell me and any other info that may be useful to what i am trying to do will be great thankyou.
_________________ If life was easy we would all be living |
||
| Top | |
||
| NCIIGHIA |
|
||
|
is noone replying because you guys think im an idiot or doesn't anyone have any information
_________________ If life was easy we would all be living |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
if the EF motor is rebuilt, i'd fit the ticky head to it and be done. No, AU stud girdle won't fit as it cross bolts into the AU sump. and no, AU sump won't work.
Girdles can be bought aftermarket though
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Six |
|
|||
|
89.SVO wrote: if the EF motor is rebuilt, i'd fit the ticky head to it and be done. No, AU stud girdle won't fit as it cross bolts into the AU sump. and no, AU sump won't work. Girdles can be bought aftermarket though +1
_________________ MGW Short Throw Shifter, CVE Cam, CVE Head, SS Big Mouth Air Intake, Pacemaker Headers, 3" Exhaust, 3" Varex, 3" Cat, 19" Silver Agents, EMS Stinger 4424, 42lb Injectors and Walbro 255lb Fuel Pump |
|||
| Top | |
|||
| NCIIGHIA |
|
||
|
ok thanks lots guys good info but will an ef engine fit straight into an nc body. i know some stuff will need to be changed but will it physically fit in the bay and would i use ef or ed mounts.
_________________ If life was easy we would all be living |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
dude, it's literally the same engine. Used the EA-ED mounts, pull out the synchroniser, swap the drive gear into your NC dizzy, drop the dizzy in. Use the NC manifolds.
Also, if I was you, i'd use the EF serpentine belt setup
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| NCIIGHIA |
|
||
|
ok cool thankyou thats what i wanted to know will au accesories bolt up the same as ef ones mainly alt and pwr steer is there any changes with air con and will the log manifold clear all other newer bits.
_________________ If life was easy we would all be living |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
you'd have to change the timing cover to the EF one. and balancer. So the timing mark lines up again. Use the EA-ED A/C bracket, but then use all the EF accessories EXCEPT you'll have to buy a XH ute with a log manifold belt tensioner. They are different to EF/L or XH XR6 ones. A EF/L one won't work.
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| NCIIGHIA |
|
||
|
ok thankyou will an au engine be the same way with xh tensioner and other gear.
_________________ If life was easy we would all be living |
||
| Top | |
||
| 89.SVO |
|
|||
Age: 35 Posts: 3382 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
I believe so. Just with an AU engine when you remove the synchroniser to fit the dizzy. Swap the AU gear onto your dizzy. Stops them from chewing out the auxiliary shaft gear
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| NCIIGHIA |
|
||
|
thanks mate food for thought i have an ef engine with an au head on it sitting here might throw some rings and bearings at it and throw that in with the belt upgrade for the moment
_________________ If life was easy we would all be living |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 75 guests |
