|
WILLDB |
|
|||
|
My 96 EF Fairmont has a misfire under load, however I have changed plugs and leads, and the distributer cap appears fine. What else could cause this? it mainly happens between the 1000 and 1500rpm range.
Thanks in advance for any help.
_________________ 2004 BA XR6 Manual in Blueprint Blue |
|||
Top | |
noisy |
|
||
|
weren't EF's coil pack, then dizzy on EL's
_________________ |
||
Top | |
concorde |
|
|||
|
noisuf wrote: weren't EF's coil pack, then dizzy on EL's
Thats what i thought too.
_________________ 2nd Place Summernats19 SQ Comp, Street Pro 0-600 Class
|
|||
Top | |
The_Jackal |
|
|||
|
yeah ef coil el dizzy
if its got a miss under load most likley the coil pack, i had the same prob bout 3 months ago
_________________ EF XR8 - 5speed, Extractors & Exhaust |
|||
Top | |
noisy |
|
||
|
if he's got a coil pack what the hell is he looking at to see a dizzy cap..
_________________ |
||
Top | |
WILLDB |
|
|||
|
When i was changing the leads I had someone underneath the car changing them while i was changing the leads at the top. my mate said he looked at the "distributor cap" and it looked fine, but now i have looked at it i can clearly see it is a coil pack. i might try getting a replacement pack and see if it stops the misfire
_________________ 2004 BA XR6 Manual in Blueprint Blue |
|||
Top | |
nicco |
|
|||
|
out of interest, would the car being cold have an effect on it? cause my EF has a bit of a miss when i take off, but the car is cold. as soon as it warms up all is good and it doesnt miss a beat...
|
|||
Top | |
partsguy |
|
||
|
Hey Nicko my ex's EF was doing that too. Got gradually worse as time went by. Turned out to be the inlet manifold gasket. Easy to check, spray WD40 or CRC RP7 Aerostart (you choose) on the gasket on each inlet port. If it's leaking, it will stuck it in and the idle will change a bit. Her car now runs like the weopon that it was when I shared it with her!!
_________________ Just 'invested?' in an EB11 ghia 5.0 wagon. time to play.... |
||
Top | |
nicco |
|
|||
|
might have to get a new cam... so that then iu have anexcuse to rip off the inlet manifold!!
"hey dad, can you buy me a new cam, the mainfold is leaking!!" |
|||
Top | |
Who is online |
---|
Users browsing this forum: No registered users and 98 guests |