|
| Six |
|
|||
|
I have been using the search tool but can't find an answer...
I need to change my engine oil, I have always used the 15w40 suggested by Ford. Just curious, with a modified engine is it still suitable to use this grade of oil or better to use something else??
_________________ MGW Short Throw Shifter, CVE Cam, CVE Head, SS Big Mouth Air Intake, Pacemaker Headers, 3" Exhaust, 3" Varex, 3" Cat, 19" Silver Agents, EMS Stinger 4424, 42lb Injectors and Walbro 255lb Fuel Pump |
|||
| Top | |
|||
| lowie |
|
||
|
what car did the engine come from?
|
||
| Top | |
||
| Six |
|
|||
|
It's my EL XR engine but will be getting a fully worked head and big cam etc etc
_________________ MGW Short Throw Shifter, CVE Cam, CVE Head, SS Big Mouth Air Intake, Pacemaker Headers, 3" Exhaust, 3" Varex, 3" Cat, 19" Silver Agents, EMS Stinger 4424, 42lb Injectors and Walbro 255lb Fuel Pump |
|||
| Top | |
|||
| ranga83 |
|
||
|
Six wrote: It's my EL XR engine but will be getting a fully worked head and big cam etc etc I would stick to.the oil it likes. I dont think you would need to change grades just for headwork and cam. All your clearances would still be the same
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| Six |
|
|||
|
What is a top of the line 15w40 oil that works well for the EL?
_________________ MGW Short Throw Shifter, CVE Cam, CVE Head, SS Big Mouth Air Intake, Pacemaker Headers, 3" Exhaust, 3" Varex, 3" Cat, 19" Silver Agents, EMS Stinger 4424, 42lb Injectors and Walbro 255lb Fuel Pump |
|||
| Top | |
|||
| phongus |
|
|||
|
I just run 15W40...used to run Magnatec which I didn't have issues with, but now use Nulon because it is cheaper and no issues with that one either.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| ranga83 |
|
||
|
I used to use penrite but had oil pressure problems so i switched to phoenix 15w40 semi syn and havent had any problems. Costs about 120 for a 20litre drum
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| GeZza200 |
|
||
|
Iv been using Nulon 10w40 Full Syn and it seems to work well. its about $60 for 5L
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Six |
|
|||
|
GeZza200 wrote: Iv been using Nulon 10w40 Full Syn and it seems to work well. its about $60 for 5L How would the 10w go in an EL? I thought it had to be 15w?
_________________ MGW Short Throw Shifter, CVE Cam, CVE Head, SS Big Mouth Air Intake, Pacemaker Headers, 3" Exhaust, 3" Varex, 3" Cat, 19" Silver Agents, EMS Stinger 4424, 42lb Injectors and Walbro 255lb Fuel Pump |
|||
| Top | |
|||
| Six |
|
|||
|
Does anyone know the part number for the K & N oil filter for an EL?
_________________ MGW Short Throw Shifter, CVE Cam, CVE Head, SS Big Mouth Air Intake, Pacemaker Headers, 3" Exhaust, 3" Varex, 3" Cat, 19" Silver Agents, EMS Stinger 4424, 42lb Injectors and Walbro 255lb Fuel Pump |
|||
| Top | |
|||
| ranga83 |
|
||
|
Six wrote: Does anyone know the part number for the K & N oil filter for an EL? Hp-3001 as per their site
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| ranga83 |
|
||
|
Actually there is 3 of them on there. Hp-3001 http://www.knfilters.com/search/product ... od=HP-3001
Ps-3001 http://www.knfilters.com/search/product ... od=PS-3001 Ss-3001 http://www.knfilters.com/search/product ... od=SS-3001 the ss one is a washable one
_________________ ef futura, pacemakers, 2.5inch catback, k&n panel filter and 3.45 lsd. extractors/cat, ticky head, custom cam grind, t5. now onto cosmetics. |
||
| Top | |
||
| GeZza200 |
|
||
|
Six wrote: GeZza200 wrote: Iv been using Nulon 10w40 Full Syn and it seems to work well. its about $60 for 5L How would the 10w go in an EL? I thought it had to be 15w? Its just thinner oil when its cold, easier to make it's way up to the top of the head with less noise. I have used 5w20 before and works fine. 15w40 was recommended for these engines 20+ years ago. Oil has advanced heaps since then, but that doesn't mean you have to change but there are more options now.
_________________ EL Futura: CVE head, Wolf V500, ICE Ignition and Coil, 36lb injectors, Walbro 255lb, Paci comps, 3" exhaust, T5, Harrop Truetrac with 3.9s. Now with 198.9rwkw, (~185rwkw and 13.80 @99.1mph) with more power to come |
||
| Top | |
||
| Six |
|
|||
|
Would an oil change be better now or wait for the new head??
_________________ MGW Short Throw Shifter, CVE Cam, CVE Head, SS Big Mouth Air Intake, Pacemaker Headers, 3" Exhaust, 3" Varex, 3" Cat, 19" Silver Agents, EMS Stinger 4424, 42lb Injectors and Walbro 255lb Fuel Pump |
|||
| Top | |
|||
| phongus |
|
|||
|
Six wrote: Would an oil change be better now or wait for the new head?? Depends how long it will take for the new head. If you won't be putting the new head in for the next 6 months, I say change it.
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 95 guests |
