Fordmods Logo

enogine not starting 

 

Page 1 of 1 [ 11 posts ] 

 
 Post subject: enogine not starting
Posted: Thu Feb 24, 2005 11:10 am 
Fordmods Newbie
Offline

Age: 40

Posts: 17

Joined: 18th Nov 2004

Gallery: 2 images

Location: cairns
QLD, Australia

hey guys

Ive got a problem with my EA my engine wont start, there is no spark coming from the leads and they are only new and the dizzy looks fine..I think it could be either the Ignition coil or the module on the dizzy. Any help would be appreiciated.
Top
 Profile  
 
 
Posted: Thu Feb 24, 2005 6:39 pm 
Parts Gopher
Offline
User avatar

Age: 37

Posts: 76

Joined: 5th Nov 2004

Ride: xf

Location: wellington
NSW, Australia

does the engine turn over or not

 

_________________

"He who falls to sleep with itchy bum
wake up with smelly finger."

Top
 Profile  
 
 
Posted: Thu Feb 24, 2005 7:14 pm 
Tyre Shredder
Offline
User avatar

Age: 41

Posts: 374

Joined: 22nd Dec 2004

Ride: EB 5Spd

Location: Brisbane
QLD, Australia

when this happened to my ea turned out to be the coilpickup module inthe dizzy but you could be luckier than myself might be something easy to fix

 

_________________

Image

Top
 Profile  
 
 
Posted: Thu Feb 24, 2005 8:12 pm 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia

Check the centre pin inside the dizzy cap, they sometimes fall out.

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"

Top
 Profile  
 
 
Posted: Thu Feb 24, 2005 8:30 pm 
Getting Side Ways
Offline
User avatar

Age: 59

Posts: 4370

Joined: 5th Nov 2004

Ride: BA Fairlane Ghia

Location: Karratha
WA, Australia

Main fuse? its a 100amp, on mine anyway.
Top
 Profile  
 
 
Posted: Fri Feb 25, 2005 9:31 am 
Tyre Shredder
Offline

Age: 44

Posts: 314

Joined: 5th Nov 2004

Ride: Fairlane

Location: Cairns, Far North Queensland
QLD, Australia

Pull out the lead from the coil, and see if that has spark. Probably just the coil, but it is a bit of a b**ch to replace, being up under the inlet manifold. Two 8mm bolts and it should come out.

 

_________________

EL GLI, White
Power windows, Fairmont/Ghia door trims, converted to manual, extractors, zorst, wade cam, stereo, Tickford ECU, Tickford body kit, XR wheel.....

Mods to come: 3:45 LSD sitting in shed!!

Top
 Profile  
 
 
Posted: Fri Feb 25, 2005 10:41 am 
Getting Side Ways
Offline

Age: 68

Posts: 437

Joined: 11th Nov 2004

Ride: EL GHIA

Location: adelaide
SA, Australia

same thing happened on my EA - TFI module on dizzy
common fault apparantly
Top
 Profile  
 
 
Posted: Fri Feb 25, 2005 11:26 am 
Fordmods Newbie
Offline

Age: 40

Posts: 17

Joined: 18th Nov 2004

Gallery: 2 images

Location: cairns
QLD, Australia

yeah i had a look at it yesterday and replaced the dizzy module and cleaned up the dizzy cap and put a new coil lead in but still wouldnt start for..the engine is turnin over but not getting ignition..i didnt have time to test the coil but will do this arvo but yeh if it is the coil it wont be fun to change..

thanx for the input guys, ill let u kno if all goes well
Top
 Profile  
 
 
Posted: Fri Feb 25, 2005 11:46 am 
Getting Side Ways
Offline
User avatar

Age: 61

Posts: 4102

Joined: 18th Nov 2004

Gallery: 10 images

Ride: PX2 Ranger 4x4 XLT Dual CAB

Location: Carrum Downs
VIC, Australia

Have you check inside the cap? terminals, centre pin etc? That pin falling out is so common it catches many people out.

Check the coil by putting a earthed sparkplug into coil lead and have someone crank engine over, if you have a good powerful spark, then its not the coil.

If it does turn out to be the coil it is easier to change from underneath.

 

_________________

Image
She's meanness put to music and the b**ch is born to run!
Like the sign says, "speed's just a question of money. How fast can you go?"

Top
 Profile  
 
 
Posted: Mon Feb 28, 2005 11:14 am 
Fordmods Newbie
Offline

Age: 40

Posts: 17

Joined: 18th Nov 2004

Gallery: 2 images

Location: cairns
QLD, Australia

hey guys ive put a new coil in over the weekend and there is still no spark!!

i was wondering if anyone could tell me where the main ignition fuses and fuel pump fuse is located?? it would be a great help? cos it also seems that my pump is not priming on ignition as well so i just want to check pump fuse as well.
Top
 Profile  
 
 
Posted: Mon Feb 28, 2005 12:30 pm 
Tyre Shredder
Offline

Age: 44

Posts: 328

Joined: 6th Nov 2004

Ride: EL XR6

Location: Sydney
NSW, Australia

In the EL the fuses for the TFI and fuel pump are located under the overflow tank, you should have checked these first, they might be the same in the EA
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 11 posts ] 

Who is online

Users browsing this forum: Google Adsense [Bot] and 56 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Nov 23, 2024 10:16 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names