|
| clampy |
|
||
|
exhaust leaks..
whats the easiest way to find exhausts leaks with out going to exhaust place.. getting under and feeling around for it lol any easier ways....
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
hold your hand over the exhaust tip and let the car run for a bit if there is a hole you'll here a hiss getting louder and louder (make sure you put something over your hand as the exhaust tip may be hot)
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| clampy |
|
||
|
ill use a couple of rags.
wouldnt it stall ,wouldnt be good for the engine would it doing that.
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| EDXR6-Poly |
|
|||
|
clampy wrote: ill use a couple of rags. wouldnt it stall ,wouldnt be good for the engine would it doing that. you dont want to block the exhaust off completely just till you can hear a hissing sound and if motor goes to stall take your hand off the exhaust tip ?
_________________ AU2 engine with Hoppers head/cam performance package & spool rods / CP pistons ,Snort 1200 plenum, T56 Manual & Billet short shifter, Front & Rear Slotted rotors, Pedders lowered suspension, LSD and tuned with EMS stinger 4424 347rwkw THE ED XR6 IS BOOSTED |
|||
| Top | |
|||
| clampy |
|
||
|
ok to easy thanx for ya help.
_________________ EL Futura 5 speed factory:PH47FL goneeeee |
||
| Top | |
||
| FAST-XR |
|
|||
|
holes in your exhaust will show up as black sooty spots, should be easy to spot... check all the welds in the pipe work and any seams on the muffs for blackened areas.
_________________ 07 BF MKII XR6T |
|||
| Top | |
|||
| ghia97 |
|
||
|
Brackets also become loose and can become noisy. If it has a chrome tip the weld can sometimes brake and rattle around! Shake it while engine off, if your hear noises baffles could be stuffed and noisy!
|
||
| Top | |
||
| TROYMAN |
|
||
|
you can use a piece of hose and use it like a stethoscope, put one end to your ear and the other around the welded joins and gaskets..
if there is a leak you will hear it... |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 77 guests |
