|
| cboz |
|
|||
|
Trying to get the top half of the BBM in my EF off but the bolts which require an allen key are so tight even the power drill won't budge them, lol. Anyone who has removed it, how the f*%k did you loosen the bolts?
|
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
buy the correct allen key bit for a socket wrench with an extension so you can turn it
|
||
| Top | |
||
| smiley235 |
|
|||
|
Or get a long thin tube that can fit over the allen key to use as leverage, that was, either you will loosen the bolt or the allen key will snap (which would indicate it isn't strong enough to get the job done)
_________________ 178.3 rwkw
|
|||
| Top | |
|||
| fairmont599 |
|
||
Posts: 1135 Joined: 27th Oct 2005 |
I just used an allen key with a long tube over it for leverage. They were tight but nothing broke. Then i used allen keys with a T bar handle to get em out or would have taken ages!
|
||
| Top | |
||
| phongus |
|
|||
|
Trust me...get a set of allen keys for a socket wrench as someone mentioned, it's a b**ch with just an allen key. An you might have to get a new gasket for the BBM while you are at it.
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| cboz |
|
|||
|
Thanks guys, got them out with a tube and allen key, gotta love leverage. Bloody hell there are a lot of bolts, lol. I think the metal gasket should be fine to re-use. Also there is quite a bit of oil in the manifold.
|
|||
| Top | |
|||
| phongus |
|
|||
|
cboz wrote: Thanks guys, got them out with a tube and allen key, gotta love leverage. Bloody hell there are a lot of bolts, lol. I think the metal gasket should be fine to re-use. Also there is quite a bit of oil in the manifold.
I personally would use a new one unless you can't get one from somewhere, but that's just me. You can clean the oil up, if you want, though it'll just build up again over time. I can't remember what causes this or if it's normal...I found some oil on my manifold too. phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| cboz |
|
|||
|
Cheers mate, I'll clean it up not too bad.
|
|||
| Top | |
|||
| twase |
|
|||
|
cboz wrote: Cheers mate, I'll clean it up not too bad. Mine has been off and on twice without changing it, each time I gave it a coat with silastic.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| gogetta |
|
|||
|
twason wrote: Mine has been off and on twice without changing it, each time I gave it a coat with silastic.
dodgy mechanics and their silicon.. 
_________________ |
|||
| Top | |
|||
| cjh |
|
|||
|
cboz wrote: Cheers mate, I'll clean it up not too bad.
Use ACL Hylomar to reuse the tin gasket. When undoing those allen socket cap screws, give them a wack with a punch first.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 128 guests |
