|
| fairmont 1 |
|
||
|
hi.
which lukey and k and n filter will fir a ea-ed multi point air box. the part number for the ryco air filter is A431 if that helps, but oneday want to put a performance air filter in it. what snorkel will fit the ea-ed as standard |
||
| Top | |
||
| PIMP_LTD |
|
||
|
fairmont1 wrote: hi. which lukey and k and n filter will fir a ea-ed multi point air box. You do know that the auto parts stores oh which you can purchase the filter will have the part number listings, and most likely know it of by heart anyway?? And i'm pretty sure people fit XH snork cos they are bigger?? I could be mistaken
_________________ Commodore australia's favorite car??? What a load of s**t |
||
| Top | |
||
| KWIKXR |
|
|||
|
As Pimp said, XH snorkel will fit, its a fair bit larger than the stock one and im pretty sure it fits EA-ED airboxes.
Just go to your nearest auto parts place which sells K&N filters and ask for one. You wont get much of a difference going to a high flow filter, paper element ones work just fine |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
also can i get away with just cutting around the plate that you bolt the ed snorkel to in the shroud so it doesnt have to be cut off
|
||
| Top | |
||
| fairmont 1 |
|
||
|
also has anyone got templates on making your own standard snorkel for the ed 6 cyl model and also how to make a std xh non xr snorkel as in sizes of each part and where to bend and cut each bit
|
||
| Top | |
||
| fairmont 1 |
|
||
|
want to know the below
i get away with just cutting around the plate that you bolt the ed snorkel to in the shroud so it doesnt have to be cut off also has anyone got templates on making your own standard snorkel for the ed 6 cyl model and also how to make a std xh non xr snorkel as in sizes of each part and where to bend and cut each bit |
||
| Top | |
||
| SpeedyED |
|
|||
|
fairmont1 wrote: want to know the below i get away with just cutting around the plate that you bolt the ed snorkel to in the shroud so it doesnt have to be cut off also has anyone got templates on making your own standard snorkel for the ed 6 cyl model and also how to make a std xh non xr snorkel as in sizes of each part and where to bend and cut each bit Alot of people just buy the snorkel off ebay or off the forum's if anyone has it, because Ford don't stock the snorkel anymore, it's obsolete. Therefor there won't be much around for making a XH Snorkel Replica, if you do make one, be sure to post it up on here. Good luck 
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
using sheet metal to make the snorkel am i able to get away with pop riverting and then using bakers soldering fluid and run some solder to neaten the edges a little
|
||
| Top | |
||
| SpeedyED |
|
|||
|
fairmont1 wrote: using sheet metal to make the snorkel am i able to get away with pop riverting and then using bakers soldering fluid and run some solder to neaten the edges a little Do share with us on what you did to make the snorkel, might be worth even taking some piccy's as you go along 
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| fairmont 1 |
|
||
|
if i was to make one would it look as neat as the proper one
|
||
| Top | |
||
| SpeedyED |
|
|||
|
Yeah, Maybe? as long as you sand, prime, and paint it, it should come up beaut
_________________ Pre AU Adapters for sale |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 139 guests |
