|
| bondy99 |
|
|||||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Some time ago I fitted this filler tank to my vehicle to replace the old one that was getting bit of crud that was hard to remove.
All hose connections were tight and no water seen leaking, a good sign. After having the water rise in temperature I noticed a few bubbles of air coming through between the cap holder and filler. I've attached two pics. Is this filler a faulty manufacture? I put the old one back on and have no issues with it apart from the crud.
|
|||||
| Top | |
|||||
| Mad2 |
|
|||
|
I take it the "new one" is from ebay? ... have heard quite a few stories re ebay tanks
|
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
Mad2
Yep, sure is. The other one still on the car also from Ebay, had no problems with that one, starting to discolour with gunk build up. Flushed it a few times, a bit cleaner but still has crap inside that wont wash out. |
||
| Top | |
||
| Mad2 |
|
|||
|
someone did chat about cleaning one up .... dunno where I read it tho.
|
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
I did try to clean another I had in the past. I used Hydrochloric Acid solution and soaked for 24 hours.
It cleaned it a bit but not very successful. |
||
| Top | |
||
| Mad2 |
|
|||
|
or do that & paint the outside?
|
|||
| Top | |
|||
| bondy99 |
|
||
Age: 65 Posts: 1128 Joined: 13th Sep 2010 Ride: Ford Falcon AU 2000 Series II Location: Crestmead |
That was a an older unit, wont be using Hydrocloric acid again, too risky.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 52 guests |
