|
| cooldude |
|
||
|
hay guys just brought a ford falcon with recon ef engine old was eb xr6 and it idles around 4500 3000 rpm when i stop at the lights and i have to wire the radiator fan to the batt so it keeps the engine cool . can a empty steerinf fluid be the problem for the high idles or can it be something else and the thermo stays at cold
_________________ FORD FALCON BA N/A MANUAL |
||
| Top | |
||
| louie0408 |
|
||
Age: 36 Posts: 122 Joined: 21st May 2010 Ride: 1997 EL Ford Fairmont Ghia Location: Brisbane |
throttle stuck open? that is a very high idle... i would be looking at why its idling so high not how to keep it cool because its idling so high..
|
||
| Top | |
||
| EL___Fairmont |
|
|||
|
So basically from your thread you have a EB running a EF engine,ecu and thermo fan relays. Obviously they were not connected correctly. A search will fix your problems or just bite the bullet and get an after market kit to trigger the thermo's on...
_________________ Current ride 2007 |
|||
| Top | |
|||
| cooldude |
|
||
|
correct eb falcon with ef engine if the heads were gone how would i no
_________________ FORD FALCON BA N/A MANUAL |
||
| Top | |
||
| Shen Long |
|
|||
Age: 49 Posts: 391 Joined: 22nd Aug 2008 Ride: 2002 AUII Fairlane Sportsman V8 Location: Roxby Downs |
cooldude wrote: correct eb falcon with ef engine if the heads were gone how would i no oil in the water or water in the oil is a good way. |
|||
| Top | |
|||
| SWC |
|
||
|
cooldude wrote: hay guys just brought a ford falcon with recon ef engine old was eb xr6 and it idles around 4500 3000 rpm when i stop at the lights and i have to wire the radiator fan to the batt so it keeps the engine cool . can a empty steerinf fluid be the problem for the high idles or can it be something else and the thermo stays at cold Incorrectly worded statements and questions get confused anwsers. 1) What is the car? You list that you have an EF but your question appears to state that it is an EB. 2) Engine itself means nothing as long as the correct auxilaries were fitted. 3) If it is an EB with EF engine, is it running dizzy or Coilpacks? Is it fitted with Log manifold or BBM? What ECU are you running? Correct info and as much as possible leads to correct advice. |
||
| Top | |
||
| bry40l |
|
|||
|
unplug the ics and see if it drops to where its ment to be, if not then turn the base idle down, theres a little idle screw on the throttle body near the accelorator cable, i think if you set it to about 700 rpm and plug the ics back in it should be fine as i had the same problem and this is how i fixed it
_________________ BF XR6 |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 104 guests |
