|
| TaraHymen |
|
|||
|
anyone know of a good place in perth i can get some headwork done. specifically i'm looking for someone who is experienced with a 4.0L.
kostecki's want 4K for their package and i was hoping to spend a bit less with someone who isnt selling a name.
_________________ <a href="http://www.spyderbyte.com.au">
|
|||
| Top | |
|||
| markr154 |
|
|||
|
TaraHymen wrote: anyone know of a good place in perth i can get some headwork done. specifically i'm looking for someone who is experienced with a 4.0L.
kostecki's want 4K for their package and i was hoping to spend a bit less with someone who isnt selling a name. Try picking up a copy of Perth Streetcar magazine ...plenty of alternatives in there. Maybe call Terry at BPT Motorsport 9302 3415 ...maybe he can arrange the work or recommend someone to you. Kostecki's are very expensive for not much gain in power.
_________________ Hot Chilli Red EL XR6, 5-spd, JMM DEV 5 enhanced (161 rwkw custom tuned), Eliminator Switch Chip, 18" BA GTP rims, Pedders Superlows, BA XR6 badges, BA Sunroof, Pioneer Stereo, Splits, 6x9's, 10" sub, 700W 6-ch Viper amp.
|
|||
| Top | |
|||
| TaraHymen |
|
|||
|
excellent. thanks very much.
i'll ring terry tomorrow. kostecki is expensive but his website makes claims of 305hp@ the wheels for the 4K which in itself isnt too bad....until u speak to him in person and then there's heaps of other factors. without rubbishing them they are probably right but i was hoping to find someone more suited to my budget.
_________________ <a href="http://www.spyderbyte.com.au">
|
|||
| Top | |
|||
| Gaz |
|
||
|
305hp@wheels on a 4L?
thats well over 200rwkw. basically should be given a medal if he can do that for a street car
_________________ 2007 Steel BF Ghia MKII V8 - 19" GTP's + Superlows |
||
| Top | |
||
| TaraHymen |
|
|||
|
http://www.kostecki.com.au/ford_cnc_heads.php
second from the bottom
_________________ <a href="http://www.spyderbyte.com.au">
|
|||
| Top | |
|||
| alfy |
|
|||
|
maybe the 200rwkw is the estimate for a BA?
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| markr154 |
|
|||
|
TaraHymen wrote: kostecki is expensive but his website makes claims of 305hp@ the wheels for the 4K which in itself isnt too bad....until u speak to him in person and then there's heaps of other factors. without rubbishing them they are probably right but i was hoping to find someone more suited to my budget.
Yep, I went in and spoke to them about their head / cam / intake packages ...and they told me it would be approx $4K for a 20% increase in power (about 130-140 rwkw on a stock EF) ...$4K didn't seem worth it for a measly increase like that. You could always talk to Terry about getting some Jim Mock parts over from Melbourne ...as I know BPT have already spoken to them about getting their gear & fitting it here in WA.
_________________ Hot Chilli Red EL XR6, 5-spd, JMM DEV 5 enhanced (161 rwkw custom tuned), Eliminator Switch Chip, 18" BA GTP rims, Pedders Superlows, BA XR6 badges, BA Sunroof, Pioneer Stereo, Splits, 6x9's, 10" sub, 700W 6-ch Viper amp.
|
|||
| Top | |
|||
| Lynx_E's |
|
||
|
i heard langtrees is pretty good! lol
_________________ 1989 Fairmont Ghia
|
||
| Top | |
||
| markr154 |
|
|||
|
Lynx_E's wrote: i heard langtrees is pretty good! lol
Hehe ...I thought it, but I didn't write it ...you tool. 
_________________ Hot Chilli Red EL XR6, 5-spd, JMM DEV 5 enhanced (161 rwkw custom tuned), Eliminator Switch Chip, 18" BA GTP rims, Pedders Superlows, BA XR6 badges, BA Sunroof, Pioneer Stereo, Splits, 6x9's, 10" sub, 700W 6-ch Viper amp.
|
|||
| Top | |
|||
| Molloy |
|
|||
|
4k!! did u laugh at him and walk away?
_________________ SS Inductions CAI, K&N Filters, M-spec FMC, Turbosmart BOV, 8psi capa tune, X-force cat. |
|||
| Top | |
|||
| Disco Frank |
|
|||
|
thtas a f**k for just headwork...
if it was a full rebuild not bad but f**k that
_________________ RIP SCOTT |
|||
| Top | |
|||
| AdamN |
|
||
|
I'm after someone for headwork too.. I'm in the research stage as well.
|
||
| Top | |
||
| markr154 |
|
|||
|
Molloy wrote: 4k!! did u laugh at him and walk away?
I didn't laugh but I did walk away ...and I then looked into the Jim Mock DEV packages that were producing more power. This is how I came to have the EL XR6 I have now, as Brendan Mock recommended it to me while I was on the phone to him! Yep, $4K was for the head porting, cam, intake, labour and installation ...but it was the measly difference in power that put me off.
_________________ Hot Chilli Red EL XR6, 5-spd, JMM DEV 5 enhanced (161 rwkw custom tuned), Eliminator Switch Chip, 18" BA GTP rims, Pedders Superlows, BA XR6 badges, BA Sunroof, Pioneer Stereo, Splits, 6x9's, 10" sub, 700W 6-ch Viper amp.
|
|||
| Top | |
|||
| TaraHymen |
|
|||
|
it's gone up then. i got quoted 4K on a head, cam, followers and valve springs - no installation or labour.
on a v8 u can easily spend 20+ on a pair of heads so 4 isnt too bad for 1 head. it's too bad for me cos i dont have it.
_________________ <a href="http://www.spyderbyte.com.au">
|
|||
| Top | |
|||
| uglybob |
|
|||
|
Head Torque
_________________ R.I.P. Scotty |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 108 guests |
