|
| Hazzard |
|
|||
|
As the topic suggests.
The right hand side globe doesnt last long before blowing. On the third globe in three months now. Getting a bit axpensive replacing them. Anyone know if there is a self check that can be performed to locate the fault? Or does this sound like something for the Auto Electrician? Cheers. |
|||
| Top | |
|||
| Krytox |
|
|||
|
Check for looseness inside the headlamp itself.
If its loose, it'll vibrate and kill your globes.
_________________ Carefree, we may not be number one, but we're up there. |
|||
| Top | |
|||
| EL XR8 |
|
|||
|
Also, don't touch the glass part of the globe. The acid from your fingers can cause the globes to blow prematurely.
Unfortunately there's no Advanced Medical Institute for prematurely blowing globes. 
|
|||
| Top | |
|||
| 95efwagon |
|
||
|
think its the oil from your fingers that bouild on the globe and causes the thing to break. i had a run of broken bulbs, on the battery side of my ef, i think it was due to this, as it is tricky to get the lights in when you are doing it quickly without taking the battery out. Try as you might you are still likely to touch the globe if you dont get it in 1st time. try using latex gloves, i'd recommend the unpowdered ones just in case the powder does something to the globes as well, then you wont know wtf is going on.
|
||
| Top | |
||
| 95efwagon |
|
||
|
btw that should say "boil on the globe" fat fingers, and small keyboards, my bad
|
||
| Top | |
||
| richard williams |
|
||
Age: 55 Posts: 535 Joined: 22nd Sep 2005 Ride: EF wagon & EF fairmont wagon & M Location: melbourne |
the actual globe contacts get loose from the heat. I tightened mine up after a simlliar run on globes and it's lasted about 2 years since. The $2.50 austa's at safeway fuel are ok for the price.
|
||
| Top | |
||
| MadMatt |
|
|||
|
I had this on my EL and it turned out to be the relay.
_________________ Member Number 8804 Last edited by MadMatt on Wed Jun 06, 2007 7:04 pm, edited 1 time in total. |
|||
| Top | |
|||
| RedRoo |
|
|||
Age: 55 Posts: 1883 Joined: 22nd Apr 2005 Ride: 94 ED Fairmont, MY97 LE WRX Location: Seymour |
why is this in the 6cyl section? can a mod please move to the correct section
|
|||
| Top | |
|||
| pellajl |
|
||
|
If you haven't put your greasy fingers on the globe or it is not loose, one of the biggest enemies of incandecent lamps is bad electical connections. Check as one person suggested, the relay contacts and the terminals that plug into the back of the globe.
I had terrible trouble with tail and indicator globes blowing in my old XA. One day I sat down and installed a proper earth to each globe and the problem disappeared. Globes lasted years after that. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 77 guests |
