|
| maccamillion |
|
|||
Age: 32 Posts: 69 Joined: 11th May 2012 Ride: 94 tickford enhanced xg ute Location: devonport |
ok so i have just done the hell of all jobs on my XG XR6 ute and change the heater core in it.....
 now i have stuck it all back together and i swear i didnt miss any wiring plugs or earth''s but the car wont start.  i turn the key on and all dash lights are normal appart from the smart lock light which blinks in this combination: 1 1 1 1 - 1 1 1 1 - 1 1 1 1 - 11111111111111111111111forever i assume it is code 4 or 444. i have proceded with the smartlock reset (key on for 1 hour) and got the car to turn over but when i turn key of again, the code comes back.  i cant find anything on fordmods to tell me what the code means or how to fix it.thanks |
|||
| Top | |
|||
| maccamillion |
|
|||
Age: 32 Posts: 69 Joined: 11th May 2012 Ride: 94 tickford enhanced xg ute Location: devonport |
Anyone???
|
|||
| Top | |
|||
| 123esproc |
|
|||
|
Did you turn the key to accessory or to red for the hour? Key needs to be on red. Does your interior dome light work? Check all fuses? And relays?
_________________ |
|||
| Top | |
|||
| 123esproc |
|
|||
|
Check out this link ............
http://www.pertheseries.com/forums/inde ... opic=12467 http://www.xfalcon.com/forums/index.php ... ease-help/ Seems to be a electrical fault with the smart module may need a bypass module to start
_________________ |
|||
| Top | |
|||
| TimmyA |
|
|||
|
Code 4 is defined as
"Electronic Lock Assembly To 'Smartlock' Connector Open Electronic Lock Assembly I/O Circuit Open Electronic Lock Assembly Power Supply Circuit Open" So with that... Did you plug in the 4 pin plug that plugs into the ignition barrel that activates smartlock? Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| maccamillion |
|
|||
Age: 32 Posts: 69 Joined: 11th May 2012 Ride: 94 tickford enhanced xg ute Location: devonport |
thanks for the reply..i am fairly sure i plugged all plugs in again. i have done the 30min reset with reds on and it starts and if i turn key off for more than 30seconds then it i have to repeat the reset again.....i have tried different ecu's and same thing.
i miss driving the beast now....ill check plugs again as i have the dash out now.
|
|||
| Top | |
|||
| maccamillion |
|
|||
Age: 32 Posts: 69 Joined: 11th May 2012 Ride: 94 tickford enhanced xg ute Location: devonport |
ok,l i have found the issue. the little black our pinned plug that comes off of the ignition wasnt plugged in. only issue now is that i cant find the other plug its supposed to join...
can anyone tell me where i could look to find it? is it on pass side or driver side of steering column? thanks.
|
|||
| Top | |
|||
| maccamillion |
|
|||
Age: 32 Posts: 69 Joined: 11th May 2012 Ride: 94 tickford enhanced xg ute Location: devonport |
OK, just an update, after pulling the dash out twice, I found the plug and chucked it back in. All I need is the xh serp belt n she's good to go. Thanks everyone for your help.
|
|||
| Top | |
|||
| TimmyA |
|
|||
|
No worries man...
At least you came to us with a code... Most people give you half a story so it makes it much harder to say check this... In your case, code 4,check the barrel assembly... Once I read that I reckoned you'd left the 4 pin plug undone... Cheers, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Robert_au |
|
|||
|
TimmyA wrote: Code 4 is defined as "Electronic Lock Assembly To 'Smartlock' Connector Open Electronic Lock Assembly I/O Circuit Open Electronic Lock Assembly Power Supply Circuit Open" So with that... Did you plug in the 4 pin plug that plugs into the ignition barrel that activates smartlock? Cheers, Tim Thread mine gold here Thanks TimmyA had the same code 4 or 444 searched the tech doco's for the codes and there not there at all that i can find sadly guess its the ol 30 min trick for me later
_________________ Current Ride |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 57 guests |
