|
| BenJ |
|
||
|
Find RDs RDL Wagon thread.
He used the complete looms and interior from an EL into his Wagon. The same thing can be done using an EF wiring loom, and was done by PIMP LTD. BenJ
_________________ BenJ's EB T5 DOHC Ghia Wagon - Current Ride |
||
| Top | |
||
| wattie |
|
||
|
cheers benj im lookin through em now..
i dunno how u do it man you really are something lol i now see how much hard work youve put into doin your wagon |
||
| Top | |
||
| wattie |
|
||
|
ok ive been searchin through a few threads lately and have decided im going to try doing a FULL conversion.. dash looms engine looms lighting and thermo looms door looms basicly everything in the ef going into the ea (except my sexy 5 speed
 that can stay) hopefully it all comes together well and thanks to PIMP_LTD for the idea.build thread: http://www.boostedfalcon.net/viewtopic.php?f=3&t=11005 ill do one on this site aswell when i become more familiar with it.. |
||
| Top | |
||
| wattie |
|
||
|
hey guys ive got the engine and dash all wired up yet everytime i turn the key to the point where your fuel pump would norm turn on one of my fuses clicks a few times then nothing.. no spark whats so ever when i turn the key fully on. can someone please help me out here..
Wattie |
||
| Top | |
||
| huggiebear |
|
|||
|
what have you actually done so far? if you did a full loom swap then id say a relay is blown, did you install the full smartlock system?
|
|||
| Top | |
|||
| wattie |
|
||
|
yea all looms and smartlock plus ive replaced every replay and nothing.. im just going to install a start button and bypass the starter motor relay
|
||
| Top | |
||
| huggiebear |
|
|||
|
stupid question... did you plug the correct the wire into the starter? there is 2 down there very close to each other.
|
|||
| Top | |
|||
| wattie |
|
||
|
my starter motor only has 1 small wire plus the battery cable as its a low reduction starter motor..
|
||
| Top | |
||
| huggiebear |
|
|||
|
i ment the loom has 2 plugs that drop down and exit at the same spot, just check that you have the red wire on the starter motor not the blue/black one
|
|||
| Top | |
|||
| wattie |
|
||
|
just went nd double checked.. theres only 1 wire that goes down and its red with a small blue stripe..
|
||
| Top | |
||
| huggiebear |
|
|||
|
under the overflow bottle there should be a brown relay, exchange that with the one from the old loom and see what happens
|
|||
| Top | |
|||
| wattie |
|
||
|
ive replaced all relays under the overflow.. still nothing.
|
||
| Top | |
||
| huggiebear |
|
|||
|
have you checked you have ALL the loom plugs plugged in. if you have id be testing the current to the starter motor to make sure its getting the crank signal and check your starter cable to the battery, make sure its got good contact
|
|||
| Top | |
|||
| ED_XR6_5 SPEED |
|
|||
|
if its not cranking try checking the earth wire for the starter relay, i had this problem with my ed and a mate had the same problem with his ef cos the earth wire runs through the bcm and if the solder join in the bcm goes crappy then it wont start. if this is the problem u can just cut the wire off from the relay and run it straight to the earth on the battery like i have (to lazy to pull the bcm out and do it properly), if you do this make sure you tape up the wire running to the bcm as they dont like a feed back through tht wire so i have been told, or if your confident enough you can open the bcm and re-solder the join. i can post some pics of my lazy fix if that would help?
_________________ 98%of city drivers will say ''holly s**t'' befor going into a ditch in a snowstorm and 98%of country drivers will say ''hold my beer and watch this'' |
|||
| Top | |
|||
| wattie |
|
||
|
thanks i shall try that tomorrow and get back to yas..
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 57 guests |
