hey guys, i just bought a automatic window lifter and want to install it into the falcon, i no where i have to join all the cables except for one, anyway i need a 12V positive pulse for the trigger cable, is there a pulse coming outta the BCM for this, so basically when i lock the car, i need a 12v pulse at that point in time, so the control box gets a pulse and closes my windows,

im pretty sure there must be one somewhere as it has an auto close on the sunroof, but i dont know where that is.

its a 95 Falcon futura and its a blue top BCM, can someone please help me out...

oh i can use a 12v neg pulse, but i doubt that will be there

thanks in advance

i might have found the answer my self, but i need clarifacation

http://www.fordmods.com/forums/documents.php?doc=26

pin 6 yellow black on the top connector, is a switched negative, i think, i can use the neg trigger on the module

can anyone shed some light???

bump??

Pretty sure that would be the one mate. Give it a go, should work.

Hi, Sounds like you may be using a vision module, if so to stop the windows going up if you lock the doors when driving connect the earth wire to accesories or ignition with a diode in the line to stop 12 volts feeding back into the module. Cheers Michael.

Hi, just found this on site http://www.fordmods.com/forums/Auto-Win ... rs-d6.html and also thought it might help.Cheers Michael

thanks mate, that will help lots!

http://www.fordmods.com/forums/viewtopic.php?t=60540 might help.

E series falcon cent locking is -ve trigger, so hook up to the lock line.