|
| XXXG |
|
||
|
Can someone please identify the part in the pic below? It's part of the wiring loom that connects to the coil on my XG. Pictured next to a 5c coin. What is it? What does it do?
 
|
||
| Top | |
||
| XXXG |
|
||
|
Haaarrroooww! Anyone?
|
||
| Top | |
||
| blu857 |
|
|||
|
i may be wrong but i found 2 of those on my ed today near the large plug for the auto . i took it as were a manual transmition plugs in . n you will prop find the blue thing is just a loop to join the 2 wires together when manual is not fitted
|
|||
| Top | |
|||
| XXXG |
|
||
|
Interesting. This plug thingo is about 10cm from the coil on the same wire that goes to the coil. Don't know how it would have something to do with auto, but hey.
I was thinking a sort of a noise suppressor, but there's one near the coil with another seperate single wire to it. |
||
| Top | |
||
| sexyr6 |
|
|||
|
it's eather a diode or a resistor, cant remember..
_________________
|
|||
| Top | |
|||
| snap0964 |
|
|||
|
Probably the tacho resistor - what's written on it ???
Measure it, it's probably 1.3 kohms.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| XXXG |
|
||
|
There's nothing written/staped on it snap, not a thing. Your XH and EF might have it there too. Might be part of the Ford I6 EA-ED-EL and XG-XH utes distributor and coil set up. It's taped over with electrical tape, so not easy to see.
|
||
| Top | |
||
| EBI347 |
|
|||
|
its for the igniton coil circuit and when they are worn out you will keep blowing coils
its a one way diode so the computer dosent get feed back from the coil and burn out its internal circuit
_________________ MY CAR PLZ TAKE A LOOK forums/xtt909-update-t66227.html |
|||
| Top | |
|||
| snap0964 |
|
|||
|
870-cse wrote: There's nothing written/staped on it snap, not a thing. Your XH and EF might have it there too. Might be part of the Ford I6 EA-ED-EL and XG-XH utes distributor and coil set up. It's taped over with electrical tape, so not easy to see. What's the colour of the wires of the plug for this ??? Have you measured it with a meter ??? Easy enough to tell if it is a diode or a resistor.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| ToranaGuy |
|
|||
|
I thought they were diodes, there's a couple in the engine bay of a EA-ED falcon. I'd have to look up the wiring diagram to be sure tho....
Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| XXXG |
|
||
|
Yeah, found another similar looking item near the relays in the engine bay. It's on the loom to the relays with electrical tape around it. At least this one has some markings / symbols on it.
its a one way diode so the computer dosent get feed back from the coil and burn out its internal circuitSo far, this looks to be the most likely answer. 
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 48 guests |
