|
| stomper |
|
|||
|
Ok guys. With in the next few weeks im going to get a new exhaust. So a few questions because im a total n00b.
First of all i was thinging of a Lukey 2.5 cat back with no resinator. How much would i expect to pay for the whole thing? How much is fiitting (average)? Can i get the exhaust installed on the factory exhaust manifold and just get it cut when i decide to get extractors? Extractors - I am thinking of extractors because if i get a new exhaust i have to do it. Plus it would be good with a cam if i decide to get one. How much and where? Lastly. Anyone done this in Adelaide that knows of a good place. Wests in corro? DNT or what ever it is? Cheers all
_________________ HOLDENS go like rockets. They fall apart in stages!!! Last edited by stomper on Sat Jun 03, 2006 6:59 pm, edited 1 time in total. |
|||
| Top | |
|||
| x3ros |
|
|||
|
dont get the lukey extractors, get a nice set of paceys instead...
my setup is: pacemaker 4480 extractors lukey 2.5" all the way through lukey high flow cat lukey straight through muffler no rear resonator it sounds horn 
p.s. when you first get your exhaust done, the car will sound really quiet, dont be disheartened, it takes about a month of carbon build up for you to start getting the full sound out of it
_________________ 2003 BA Ford Falcon XR6 | BF Typhoon Intake + K&N Filter | Lukey 2.5" catback zorst | More mods coming soon.... |
|||
| Top | |
|||
| stomper |
|
|||
|
can i get the exhaust and put it on the stock exhaust manifold then later have the exhaust cut and the extractors put back on???
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| stomper |
|
|||
|
are e-force cats ok to use. there are fuk loads on ebay for 150 inc postage.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| twr7cx |
|
|||
|
DO NOT TOUCH LUKEY EXTRACTORS THEY ARE s**t HOUSE! Unless there free or dirt cheap (150bucks or less...). I had them, notw Pacey Comps and so much better down low! Absolutely sensational!
As for Lukey exhaiusts, don't touch any brand but Lukey, nothing sounds as good! But steer clear of there turbo mufflers but... |
|||
| Top | |
|||
| qwerty68 |
|
|||
|
i have Lukey Extractors whats so bad about em is it they dont last has long or what ?
_________________ Lukey Extractors 2.5" Exhaust 3.23:1 Diff 17" BA XR8 Alloys |
|||
| Top | |
|||
| kraddy |
|
|||
|
Whilst we are on the subject i was thinking of gettimg my exhaust done. How much (approx) would it cost for Pacemaker 4480 comp extractors and lukeys / redback cat back exhaust?
|
|||
| Top | |
|||
| phongus |
|
|||
|
i thought X21 wildcats were better down low then the pacemaker comps and are cheaper?
oh btw u can just add the lukey exhaust onto ur existing cat. and when u get ur extractors just pull the manifold off and plug the extractors in. i think u might need to solder some flanges onto the cat to fit them in....i think im not an expert so dont quote me. someone correct me if im wrong. btw which are better. lukey or redback for cat back? phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| OBS35N |
|
|||
|
phongus wrote: i thought X21 wildcats were better down low then the pacemaker comps and are cheaper?
oh btw u can just add the lukey exhaust onto ur existing cat. and when u get ur extractors just pull the manifold off and plug the extractors in. i think u might need to solder some flanges onto the cat to fit them in....i think im not an expert so dont quote me. someone correct me if im wrong. btw which are better. lukey or redback for cat back? phong =P~ lukey for sure
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| phongus |
|
|||
|
sweet thanks =D
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| stomper |
|
|||
|
can anyone else verify that? The thing about putting the new lukey exhaust on to the original Cat? I dont really want to do thus becauce part of a new exhaust is to get rid of the old s**t s**t.
_________________ HOLDENS go like rockets. They fall apart in stages!!! |
|||
| Top | |
|||
| kezz |
|
||
|
stomper wrote: can anyone else verify that? The thing about putting the new lukey exhaust on to the original Cat? I dont really want to do thus becauce part of a new exhaust is to get rid of the old s**t s**t.
meh if it aint broke dont fix it. if your existing cat is fine leave it on. i slapped on a lukey to my original cat and ive had no dramas. for the amount of kw it may increase, hi flow cat isnt really worth it.
_________________ Kezz's 5sp Box Car ---> RPD enhanced with a bunch of other stuff |
||
| Top | |
||
| Rick_Deckard |
|
|||
|
So what is catback exactly? Just the exhaust from the cat back, or what? lol.
_________________ E39 523i |
|||
| Top | |
|||
| OBS35N |
|
|||
|
Till_Lind wrote: So what is catback exactly? Just the exhaust from the cat back, or what? lol.
exactly what u said they just attach it from the cat baak
_________________ OBS35N is gooonnnneeee.
|
|||
| Top | |
|||
| Rick_Deckard |
|
|||
|
OBS35N wrote: Till_Lind wrote: So what is catback exactly? Just the exhaust from the cat back, or what? lol. exactly what u said they just attach it from the cat baak Cheers mate, been wondering about for a while, lol.
_________________ E39 523i |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 59 guests |
