Hi my fellow Ford gods. I spent the weekend modding my BBM inlet manifold, it's an EF Monty. The car is smoother under acceleration, and has way better power and ressponse. It's a combo of small things that really worked on my car, you guys might be interested. There is a big depression in the bottom half of the inlet manifold in the centre, I cut and molded a piece of aluminium to a pyramid shape and covered it and the tin gasket had to be cut around. I covered the depression at the back of the plenum inside near the T-body with a piece of tin. The butterfly rod in the manifold, which is in 2 pieces and the butterflies slot between was cut in half leavingv the thread side for the screws to bite into. The actual butterflies we're halved in width on the bench grider. I cut the manifold gasket that sits against the head to the same size as the inlet ports, they are pretty rough stock. Also added a BA induction tube, BA airbox with the internal ribs removed, K&N Pod and AU Tickford snorkel. Also, as has been mentioned on here I moved the butterfly vacume tab up so that the butterflies fully open. The beast is otherwise bog stock, but it is quite a bit quicker than stock now, woot!!

Pictures, Pictures

I've only got 2, my fu%^wit brother nicked off to Perth with the bloody camera..I was thinking how hard it is to xplain sh!t while I was typing without pics, lol. stocko butterfly and shaft on right.

 

 

Attachments:

valves.JPG [ 38.92 KiB | Viewed 139 times ]

Last edited by cboz on Mon May 19, 2008 5:35 pm, edited 1 time in total.

Yeah, it fukin looks dodge, but it improves air direction instead of it all going into the big depression underneath and then being sucked out of it.

 

 

Attachments:

P3301239.JPG [ 30.37 KiB | Viewed 123 times ]

BA box and tube which has been done and seen before..

 

 

Attachments:

P4041258.JPG [ 62.49 KiB | Viewed 166 times ]

how did u get that ba filter box in

with that BA air box, did you have to replace the lower half of the box aswell or does the BA top half fit onto the EF/EL lower half? im looking at doing this to my Fairmont.

mmmm, that looks nice.. have to look into doing that myself ..

sound good but im lost as to what the pics , an how u done . would like to try if i new what im looking at lol

Ok cboz, can you tell us exactly how much more power it has and how much faster it is now? In other words before and after dyno figures and 1/4 mile times.

Last edited by cboz on Tue May 20, 2008 12:36 am, edited 1 time in total.

2 mins bashing it with a hammer is all i did to get my ba air box in sweet...

I got the BA box idea of you in the 1st place mate.......cheers.

hah.. no worries... its what this site is all about isnt it!..