|
| rogers |
|
||
|
how good is an el trany cooler cause im thinking about putting one on my ea cause it only has t one built into t radiator thanks great website
|
||
| Top | |
||
| Papa Smurf |
|
||
|
Maybe a quick trip to your local wrecker might prove fruitful for an original ED Ford one. They were fitted to EA/EB/ED 4 speed autos and are very good.
Attachment: cooler.JPG EF would be ok, I just thought you might like to try and find an original type  They DO work well.
|
||
| Top | |
||
| rogers |
|
||
|
yer tride that thats y i asked because they got alot of ef\els but no ea\eb\ed ones in there so how much different is the ef\el cooler to the ea\eb\ed one and dose it work just as well
|
||
| Top | |
||
| Papa Smurf |
|
||
|
rogers wrote: yer tried that, that's y i asked because they got a lot of ef\els but no ea\eb\ed ones in there so how much different is the ef\el cooler to the ea\eb\ed one and does it work just as well The EF/EL ones are a little different to the EB/ED ones but you should be able to fit it. While you are at it, might be worth taking the power steering cooler and fitting it to your EA, they sure do need it.  I don't have a good pic of the EF/EL one but they are a longish unit and just make sure the hoses are in good condition, they could be brittle inside. |
||
| Top | |
||
| rogers |
|
||
|
yer ok thanks and they dont look hard to fit cause anything would be better then what it got now and is the ed one as big as the el one
|
||
| Top | |
||
| ToranaGuy |
|
|||
|
The EB/ED one is fairly big, pretty cheap & works rather well. I've got one here, but i'm going to swap it's role from a trans cooler to a power steering cooler in my EB Ghia, as it is a T5 manual atm. Once upon a time the car was auto & this cooler was in it, i removed it when i converted to the manual.
I might have another Eb series 2 or Ed to wreck in a few days, that may have the cooler in good shape if your keen on a EB/ED one & pipes to suit. Shouldn't be too expensive to post, they are pretty thin & not very heavy.  Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| rogers |
|
||
|
well i got an el one now just put it on and takes alot of heat outa t fluid and was really easy to fit and can you use em for power steering coolers to and how would you connect it to the pump
|
||
| Top | |
||
| ToranaGuy |
|
|||
|
rogers wrote: .....and can you use em for power steering coolers to and how would you connect it to the pump You plumb it into the low pressure return line. Cheers ToranaGuy
_________________ I am the ToranaGuy!|74 Lh Torana Turbo|78 Hz PanelVan|86 Mighty Boy Ute|93 EB2 Ghia,GT Mockup,5spd,LPGI,Full Leather|2 x EB Xr8 5spd's|FS [VIC]: Wrecking - Eb XR8 - Parts available |Build Thread|Ebay Items - Ford Parts| |
|||
| Top | |
|||
| rogers |
|
||
|
yer ok thanks
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 135 guests |
