|
| kydence |
|
|||
|
Thanks fellas. Yeah there is plenty around here in Burleigh... got one every 2nd shop
mr_ratapus ur from the gold coast... you werent driving the white falcon in your signature near robina today were you? ive seen your siggy before with the pic and when i drove past it today i thought hmm maybe that dude is off fordmods.. recognised it just now again. was probably someone completely different, but just wondered. ky
_________________ "If it aint broke, dont fix it" ...he clearly doesn't have a car to play with. |
|||
| Top | |
|||
| mr_ratapus |
|
|||
|
Naa wasnt me robina today man i was in Brisbane. My car seems to stick out because its missing the red stripes down the side. Dont know if its a good thing.
|
|||
| Top | |
|||
| Mr Man |
|
|||
|
kydence wrote: I'm not worried about fuel costs; fuel is cheap no matter what anyone says. Sure, it has risen in costs recently, but think about it.. $1.20 for a litre of petrol, and when you walk out of woolies you realise a litre of milk cost you $2.00 and a litre of coke cost you $2.29
that may be the case, but u will only go through around 4 litres of milk a week, when compared to a tank (~65 litres) to fill up its not that cheap 
_________________ 300+rwkw HeadsexTuned XR6 Turbo Ute *NOW SOLD |
|||
| Top | |
|||
| kydence |
|
|||
|
Yep, like I said, i'm the only idiot to look at things that way
_________________ "If it aint broke, dont fix it" ...he clearly doesn't have a car to play with. |
|||
| Top | |
|||
| phongus |
|
|||
|
kydence, i suggest you shop around for prices mate...I did so myself and managed to save myself about 50 - 80 bucks when i bought my extractors. As i mentioned in another thread, I managed to score myself a set of pacemakers 4480s for 400 including gasket, new bolts and a flange. Most of the shops would have charged me 430 bucks for the pacies alone...
phong =P~
_________________ phongus = Post whore 2006 |
|||
| Top | |
|||
| deemon |
|
|||
|
ive tried heaps of different muffler configs on my baxr6. i finally have settled for my extractors, 2.5 system with the standard falcon centre muffler and free flowing cat. there is nothing worse than a droning 6 cruising the streets. ya cant make pig s**t into strawberry jam.
|
|||
| Top | |
|||
| Grimketel |
|
|||
|
Check out Jim Mocks work down in melbourne.
If you are just after an exhaust system aim for the dev1 pack. Its a little more than a standard system, but is top notch stuff. The headers are custom designed by Jim for the 4.0ltr. this is what you get for $1290 DEV "Street-Fighter" Headers (Extractors), Modified catalytic converter, 2.5" Hi-Performance mandrel bent exhaust system, Performance spark plugs, Custom Dyno testing & tuning providing that your motor is in decent knick to begin with you should see roughly 116 rwkw or there abouts. Thats about 160-170 kw at the flywheel, roughly a little more than an XR6.
_________________ enough isn't enough |
|||
| Top | |
|||
| skidder |
|
|||
|
i dunno if i would get the package above purely because you can get full exhaust at half the price (pacie headers, stock cat modified to fit and 2.5in lukey) and you wont see an extra $600 improvement with tuning after only getting exhaust
_________________ EVL098 wrote: Cramping in the hand from having it on your Wang for an excessive period of time is a definate con. Seriously do people google "f**k up modifications for Fords owned by Jews" and get linked straight to this site nowadays? AU,factory fitted tickford kit/IRS, t5,Sports ryder/KYB: gone. |
|||
| Top | |
|||
| Grimketel |
|
|||
|
maybe true if you get a second hand set of everything and do half the work yourself it will cost $600.
a new set of pacies shelf $$$ is above the $400 mark i hear. New price you would be looking in excess of a grand to have a new cat, 2.5 stainless and new pacemakers installed by a profesional. (pacies ~$400, cat ~$200, stailess 2.5 ~$350 + install --?$200? = anywhere near $1150. ) JMM headers are superior to pacies, he uses stainless exhausts, good cat, and you get new plugs, as well as a 12 month warranty. Pretty bloody competetive for what you get at $1290. so even with new everything yes JMM will be a little more expensive but not by a great lot. If you want second hand stuff done on the cheap then by all means go for that, Im just saying that for quality work going to Jim is not as exe as it sounds first up.
_________________ enough isn't enough |
|||
| Top | |
|||
| locknut |
|
|||
|
More Grunt wrote: maybe true if you get a second hand set of everything and do half the work yourself it will cost $600.
a new set of pacies shelf $$$ is above the $400 mark i hear. New price you would be looking in excess of a grand to have a new cat, 2.5 stainless and new pacemakers installed by a profesional. (pacies ~$400, cat ~$200, stailess 2.5 ~$350 + install --?$200? = anywhere near $1150. ) JMM headers are superior to pacies, he uses stainless exhausts, good cat, and you get new plugs, as well as a 12 month warranty. Pretty bloody competetive for what you get at $1290. so even with new everything yes JMM will be a little more expensive but not by a great lot. If you want second hand stuff done on the cheap then by all means go for that, Im just saying that for quality work going to Jim is not as exe as it sounds first up. You're not getting a new cat tho, for that price? It's modified like you first mentioned, yeah? They lop the ends off or something. I think JMM would prolly have good workmanship and products, but I think the best part would be the convienience of the other packages above DEV1 - drive in, drive out. I get my system fitted this thursday, $100 I paid for mint 4499's + 2.5 Lukey twin muff sys. For a hi-flo metalcat, and labour it's another $400 - $450, so I'm doing alright in that dept. All I kno is it's fkn expensive to get anything done here in ACT. Back in QLD it was so much better, go Right Price Exhausts! |
|||
| Top | |
|||
| Grimketel |
|
|||
|
lolz those prices are similar to right price! thats where I went- in slacks creek.
My genie/2.5 mandrel/new cat system on the fairy cost $990 fitted there. and the genies were a lot cheaper than the pacemakers. mate for your $$ your system sound ferkin awesome way better than anything Ive seen.
personally I love the JMM dev3hl kit, but this thread is more about just exhausts so I used dev1 as an example.
_________________ enough isn't enough |
|||
| Top | |
|||
| gryph |
|
|||
|
I gotta 2.5 cat to 2.5 stainless mandrel system with a rear muffler, rpd stg 1 cam and pacies and mine idles nice n lumpy. Drones a tad at 80 but then again i dont do 80 ks very much but give it a rev and it sounds awesome really raspy and crackly and of course very loud (the epa notice i got a while back proves it
 ). But it doesnt make u all happy inside like the real lump of a nice worked v8.............. But then again i save fuel..... *cries*
|
|||
| Top | |
|||
| Munch |
|
|||
|
kydence,
you're in qld... If you're in the market for Genie's, they're made up there. I gave them a story of being from a mechanic workshop and they gave me trade price (didn't buy in the end because of frieght). Their website is genieheaders.com. There's a QLD contact number there somewhere. I think I was quoted $300ish last year for a set of BA...
_________________ mmmmmmmmmunchy! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 0 guests |
*
