Fordmods Logo

How to remove this hose 

 

Page 1 of 2 [ 22 posts ] Go to page 1, 2  Next

 
 Post subject: How to remove this hose
Posted: Sun Nov 01, 2009 2:04 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 676

Joined: 7th Jun 2009

Ride: Ford EB II Falcon

Location: Morphett Vale
SA, Australia

Hey guys i am having an issue with what i am led to believe is the lower radiator hose ! Lately it has been dripping and losing coolant over a period of time and today i got back from driving it and the coolant is dripping much more and faster i had a look and coolant is now coming out from around the band which i think either means the hose it worn on the clamp is buggered !

It is the hose that goes from the bottom of the radiator, under the power steering pump and into the side of the head i know the part that goes into the head just comes off with undoing the clamp but how on earth do you take off the bottom half going into the block?

 

_________________

OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing !

NEW CAR: 1996 TE Magna...Mods Soon To Come

Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Sun Nov 01, 2009 2:15 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 1629

Joined: 8th Jul 2007

Gallery: 21 images

Ride: EL F100 CAPRI XR EF

Power: 234 rwkw

Location: brighton
SA, Australia

what the bottom hose on yours is stuffed from power steering fluid getting on it. that needs replacing definately. that goes onto the water pump, the other end goes on the radiator. u may need to get under the car to get at the bottom radiator hose clamp.
Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Sun Nov 01, 2009 2:22 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 676

Joined: 7th Jun 2009

Ride: Ford EB II Falcon

Location: Morphett Vale
SA, Australia

The hose cant be expensive though can it? Because i dont mind doing it again down the track as if would have taken ages for the power steering fluid to damage this hose !

So the end that goes into the radiator is just another hose clamp?

 

_________________

OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing !

NEW CAR: 1996 TE Magna...Mods Soon To Come

Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Sun Nov 01, 2009 3:15 pm 
Stock as a Rock
Offline

Age: 32

Posts: 120

Joined: 1st Jul 2009

Ride: XH falcon ute

Location: mudgee
NSW, Australia

the radiator hose will be about $20 but if its leaking power steering fluid then it could cost a bit more.
i did a power steering hose and it cost me $100 for the hose alone.
Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Sun Nov 01, 2009 3:33 pm 
Smokin em up
Offline

Age: 31

Posts: 284

Joined: 27th Sep 2009

Ride: 1995 EF Ford Fairmont

Location: Bundaberg, QLD
QLD, Australia

big dell wrote:
the radiator hose will be about $20 but if its leaking power steering fluid then it could cost a bit more.
i did a power steering hose and it cost me $100 for the hose alone.

yeh hoses do get expensive cost me around 150 bucks for hoses without the water pump from ford so add another 70 or so dollars for water pump if not more

but yeh hoses arnt too difficult to get off just undo the clamp as much as u can and wriggle it around alot and it should come lose
Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Sun Nov 01, 2009 4:26 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 676

Joined: 7th Jun 2009

Ride: Ford EB II Falcon

Location: Morphett Vale
SA, Australia

Ok just got back from messing around and i took the water pump end of the hose of and the clamp and refitted them as tight and as far up the water pump as i could, so far it doesnt seem to be leaking but i am going to have to go for a drive in a minute to see if it works 100%

 

_________________

OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing !

NEW CAR: 1996 TE Magna...Mods Soon To Come

Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Mon Nov 02, 2009 12:25 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 676

Joined: 7th Jun 2009

Ride: Ford EB II Falcon

Location: Morphett Vale
SA, Australia

I thought it worked but turns out it didnt help so i am off to price a new hose and if its cheap enough i will get one and replace it !

 

_________________

OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing !

NEW CAR: 1996 TE Magna...Mods Soon To Come

Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Mon Nov 02, 2009 12:30 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 1629

Joined: 8th Jul 2007

Gallery: 21 images

Ride: EL F100 CAPRI XR EF

Power: 234 rwkw

Location: brighton
SA, Australia

make sure u clean up the aluminium on the waterpump too where the hose fits onto, use some steel wool or scourer or something like it, they normally build up crusty oxidisation there. id be fixing that leaking power steering pump too before it wrecks the new hose and also kills the alternator. does the air conditioner/heater work now?
Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Mon Nov 02, 2009 1:11 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 676

Joined: 7th Jun 2009

Ride: Ford EB II Falcon

Location: Morphett Vale
SA, Australia

ok bought a new hose for $21 from Motortraders and some new clamps just got home to find out the hose isnt leaking at this current time ! I will wait till i see it leak next time and then i will replace it

Also nope it air con doesn't work shame i got my hopes up ! but i can hear a vaccum leak because the vents at the windscreen are constantly going !

 

_________________

OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing !

NEW CAR: 1996 TE Magna...Mods Soon To Come

Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Tue Nov 03, 2009 8:05 am 
Getting Side Ways
Offline

Age: 33

Posts: 1109

Joined: 4th Sep 2009

Ride: 92 EB s

Location: DORRIGO
NSW, Australia

Mate better offreplace the hose now before your cruising down the highway and it blows without your knowing.
Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Tue Nov 03, 2009 1:35 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 676

Joined: 7th Jun 2009

Ride: Ford EB II Falcon

Location: Morphett Vale
SA, Australia

Yea i am going to do it today !

 

_________________

OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing !

NEW CAR: 1996 TE Magna...Mods Soon To Come

Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Tue Nov 03, 2009 3:08 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 676

Joined: 7th Jun 2009

Ride: Ford EB II Falcon

Location: Morphett Vale
SA, Australia

I need some quick help please guys ! I removed the water pump end of the hose easy as and undid the clamp holding the bottom section on but it just wont come off ! Some coolant is coming out i tried prying it off with a screw driver but i can get enough leverage !

Whats the best way to get it off?

 

_________________

OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing !

NEW CAR: 1996 TE Magna...Mods Soon To Come

Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Tue Nov 03, 2009 3:15 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 1629

Joined: 8th Jul 2007

Gallery: 21 images

Ride: EL F100 CAPRI XR EF

Power: 234 rwkw

Location: brighton
SA, Australia

keep trying, dont put too much force on the hose as the radiator tank/outlet is plastic and can crack or break off. maybe use a stanley knife to slice the hose.
Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Tue Nov 03, 2009 3:31 pm 
Technical Contributor
Offline
User avatar

Age: 33

Posts: 676

Joined: 7th Jun 2009

Ride: Ford EB II Falcon

Location: Morphett Vale
SA, Australia

I guess i will try the stanley knife if i can find one because i broke one while removing some weeds just now ! so if i can find a good one then i will give it ago thanks !

anymore suggestions i am happy to hear !

 

_________________

OLD CAR: EB II Falcon, Everglade Green, 250thous (Rough Guess), Wildcat Extractors, 2.5 Exhaust with Muffler + Hot Dog, 18 Inch Rodney Jane Mags, XH Snorkel, EA MPEFI Tubing !

NEW CAR: 1996 TE Magna...Mods Soon To Come

Top
 Profile  
 
 
 Post subject: Re: How to remove this hose
Posted: Tue Nov 03, 2009 3:34 pm 
Getting Side Ways
Offline

Age: 41

Posts: 1046

Joined: 31st Mar 2005

Gallery: 2 images

Ride: ef falcon, el fairmont ghia

Location: Christchurch
New Zealand

poor boiling water on it...worked for me
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 22 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: Google Adsense [Bot] and 110 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Wed Nov 27, 2024 11:36 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names