|
| tiny56 |
|
||
|
ive always used hpr15 but my local doesnt seem to stock anymore
 so i got hpr30 is this suitable for a el 6cyl donk with 140k on it
always had good oil pressure |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
go some where els and keep using the hpr 15
|
||
| Top | |
||
| Timmeh |
|
||
|
Keep using HPR 15 until you get over 200,000ks then go HPR 30.
|
||
| Top | |
||
| msman |
|
||
|
stick with 15 ubless u got some noises.
i recently did a service, first since buyin the el, used penrite 15/40 gas as we used it on the taxi since new and there is no noise in engine, but it gave a rattle when engine was at runin temp, so i went into autobarn and got penrite hpr gas 20/60, they didn't have any 20/50 gas oil. my quetion is, is this oil ok or not no more noise in engine but the seals r startin to sweat abit more nothin serious (shouldn't have gotten less as the oil is thicker?), or should i use another oil.
_________________ why do u write in here. |
||
| Top | |
||
| One Drone |
|
|||
|
The knock at startup is do to poor oil filter design.. Get a ryco or genuine motocraft one.
_________________ There are 10 types of people in this world. |
|||
| Top | |
|||
| XRFan101 |
|
|||
|
HPR 30 is way to think to be using in a Eseries car such as an EL stick with HPR 15 its a good blend and its semi-synthetic to
 Get a decent filter as well.
I was using HPR 30 with my XF and a K&N oil Filter, worked fine pretty quite most of the time.
_________________
|
|||
| Top | |
|||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
Timmeh wrote: Keep using HPR 15 until you get over 200,000ks then go HPR 30.
why? mine has 205000km on it and i use HPR10 with no problems. the amount of kms an engine has done has no bearing on the amount of wear in the engine. it's maintinence or lack of that kills them |
||
| Top | |
||
| Timmeh |
|
||
|
tickford_6 wrote: Timmeh wrote: Keep using HPR 15 until you get over 200,000ks then go HPR 30. why? mine has 205000km on it and i use HPR10 with no problems. the amount of kms an engine has done has no bearing on the amount of wear in the engine. it's maintinence or lack of that kills them Thats what Penrite recommended when I emailed them. I was going off their recommendation. They're the oil experts. |
||
| Top | |
||
| tickford_6 |
|
||
Posts: 6449 Joined: 11th Nov 2004 |
and i'm the engine expert.
using oil that is to thick is just as bad as too thin you can't recomend oil with out seeing the engine run |
||
| Top | |
||
| Timmeh |
|
||
|
I guess your right. I gave them the condition of my engine and the Ks its done and they gave me what they think is best.
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 64 guests |
-BF MKII XR6 Turbo in EGO-