|
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
daniel000 wrote: Mitch_ wrote: daniel000 wrote: Post is very old, but hopefully someone can help. OMFG! how impatient do you want to be! dont go digging up old threads!! RETARD!! Are you alright mate? What difference is it if I post this and get a response from someone who doesnt have anger issues?? I went through every single post on this thread plus about 30 others online. I did not find one that has someone fitting a EL hybrid engine into an EF. I did however, find many threads saying they had issues. THESE threads were dated back to around 2008, it is now 2011 and things change, people find other ways of doing things AND because I'm taking a risk, spending a lot of cash, I DID want an updated response. AND I WILL DIG up old threads because that is what I found, I would rather do this than start a new one because people always complain about STARTING NEW threads without doing any research. if you do your research then post up i think you will find you won't annoy people! you just started a thread AND mined a thread too! just in future do some fricking research - then if you're in doubt start your own thread!
_________________
|
|||
| Top | |
|||
| the sam |
|
||
|
Mitch_ wrote: daniel000 wrote: Mitch_ wrote: daniel000 wrote: Post is very old, but hopefully someone can help. OMFG! how impatient do you want to be! dont go digging up old threads!! RETARD!! Are you alright mate? What difference is it if I post this and get a response from someone who doesnt have anger issues?? I went through every single post on this thread plus about 30 others online. I did not find one that has someone fitting a EL hybrid engine into an EF. I did however, find many threads saying they had issues. THESE threads were dated back to around 2008, it is now 2011 and things change, people find other ways of doing things AND because I'm taking a risk, spending a lot of cash, I DID want an updated response. AND I WILL DIG up old threads because that is what I found, I would rather do this than start a new one because people always complain about STARTING NEW threads without doing any research. if you do your research then post up i think you will find you won't annoy people! you just started a thread AND mined a thread too! just in future do some fricking research - then if you're in doubt start your own thread! shut up
_________________ LOW, LOUD AND LUMPY |
||
| Top | |
||
| ef_falcon_95 |
|
|||
|
the sam wrote: Mitch_ wrote: daniel000 wrote: Mitch_ wrote: daniel000 wrote: Post is very old, but hopefully someone can help. OMFG! how impatient do you want to be! dont go digging up old threads!! RETARD!! Are you alright mate? What difference is it if I post this and get a response from someone who doesnt have anger issues?? I went through every single post on this thread plus about 30 others online. I did not find one that has someone fitting a EL hybrid engine into an EF. I did however, find many threads saying they had issues. THESE threads were dated back to around 2008, it is now 2011 and things change, people find other ways of doing things AND because I'm taking a risk, spending a lot of cash, I DID want an updated response. AND I WILL DIG up old threads because that is what I found, I would rather do this than start a new one because people always complain about STARTING NEW threads without doing any research. if you do your research then post up i think you will find you won't annoy people! you just started a thread AND mined a thread too! just in future do some fricking research - then if you're in doubt start your own thread! shut up +1
_________________ El XR6 Turbo |
|||
| Top | |
|||
| daniel000 |
|
||
|
Mitch_ wrote: daniel000 wrote: Mitch_ wrote: daniel000 wrote: Post is very old, but hopefully someone can help. OMFG! how impatient do you want to be! dont go digging up old threads!! RETARD!! Are you alright mate? What difference is it if I post this and get a response from someone who doesnt have anger issues?? I went through every single post on this thread plus about 30 others online. I did not find one that has someone fitting a EL hybrid engine into an EF. I did however, find many threads saying they had issues. THESE threads were dated back to around 2008, it is now 2011 and things change, people find other ways of doing things AND because I'm taking a risk, spending a lot of cash, I DID want an updated response. AND I WILL DIG up old threads because that is what I found, I would rather do this than start a new one because people always complain about STARTING NEW threads without doing any research. if you do your research then post up i think you will find you won't annoy people! you just started a thread AND mined a thread too! just in future do some fricking research - then if you're in doubt start your own thread! LOL f**k me, I forgot we were all back at school! I dont need to defend myself, but I'm no mechanic and I also do not need this to stuff up so I will do what is necessary to get the right info from the right people. |
||
| Top | |
||
| the sam |
|
||
|
Mitch is on his period. He gets a bit of pms in outbursts. Ignore him
_________________ LOW, LOUD AND LUMPY |
||
| Top | |
||
| HoldenFan |
|
|||
|
daniel000 wrote: Hi guys Post is very old, but hopefully someone can help. I'm looking at buying a hybrid EL engine for my EF. Should I have any issues with fitting the EL engine into my EF? Also, I was unsure on whether or not the hybrids were a good engine? Apart from not being able to change the cam, were they stronger engines than the EF EL standards ?? swap it for a VT - better colour white paint!!
_________________ Middle of the country - Best place to live! |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot], Google Adsense [Bot] and 75 guests |
