1 rattling rocker,car has been parked for 3months.is there a hydraulic kit available?
how do i adjust the lash? or do i just buy new ones. Are they a std ford or a special size tickford?
Does anyone know where i would get rebuild specs/ book also
Any help would be appreciated. Thanks

hi, they are hydraulic so not adjustable. give it a couple of weeks or maybe a decent drive and it may clear itself, otherwise the hla's (lifters) are about $10 each from your local parts store
the gregorys/haynes manuals are available from parts shops too around $40
u can get a cd off ebay with the manual on it or someone here may have a copy too

Thanks for the reply
Will chase it up

before changing lifters, try running some oil flush through it first, could save you some time and money if they free themselves up...

mine would be noisy for a few days then free themselves up for a couple months, then repeat the process again

got sick of it, and bought a new set from shiftkits.com.au

i went to fit some retaining clips on them i had lying around, but found these lifters were wider at the top than original lifters so i just fitted the lifters without any clips, not noisy at all now